4.1 Working method “Production of trousers”
Possible processing variants
–
Front trousers pockets with pocket bag positioned underneath
–
Hind trousers pockets with or without flap, with pocket bag
positioned underneath
–
Hind trousers pockets with or without flap, with automatically fed
reinforcement strip
Feeding method
Example: Hind trousers without flap, with pocket bag positioned
underneath
1st step:
–
Select the pocket program at the control panel
–
Push the pocket bag under the pocket bag clamp 1 and position it
at the markings 2.
For example adhesive strips fitted on the fabric sliding sheet may
serve as markings.
2nd step:
–
Position the hind trousers at the “central positioning point” 5 and
the marking 4.
–
Actuate the central foot switch.
The hind trousers is clamped by the fabric downholder 3.
–
Smooth out the clamped hind trousers in the dart area.
–
If the machine is additionally equipped with vacuum:
Actuate the left foot switch.
The vacuum is switched on.
3rd step:
–
Actuate the central pedal.
The transport clamps move to the front and lower on the
workpiece.
–
Position the piping strip 6 on the transport clamps flush with the
front edges 7.
The aligning of the various kinds of piping on the transport clamps
is described more exactly in the following.
See “Positioning of piping strips”.
–
Actuate the central pedal once again.
The folder 8 lowers.
–
Actuate the central foot switch once again.
The sewing process starts.
18
