787499
10
Zoom out
Zoom in
Vorherige Seite
1/44
Nächste Seite
I II III IV
EN 08
• Press the POWER button C on the control panel 3 to put the device in standby mode,
remove the power plug from the mains power.
• Remove the front panel 5 I.
• Remove the Pre Filter 6, HEPA lter 7 and Carbon lter 8 from the device II.
• Detach the Pre Filter 6 from the HEPA lter 7.
• To clean the Pre Filter 6, use a clean rag to absorb the surface dust on the lter mesh.
If the lter is extremely dirty, use tap water to rinse the lter. Fully dry the lter mesh before
placing it back in the device.
• To clean the HEPA lter 7 and Carbon lter 8, use a clean rag to absorb the surface
dust on the lter. If the lters are extremely dirty, attach the crevice tool to the hose of your
vacuum cleaner and vacuum both sides of the lters.
Attach the Pre Filter 6 to the velcro side of the HEPA lter 7.
• Place the lters in the device III, observing the correct sequence: Carbon lter 8, HEPA
lter 7 and Pre Filter 6.
• Place the front panel 5 back on the device IV and click it into place.
Replacing the lters
• Press the POWER button C on the control panel 3 to put the device in standby mode,
remove the power plug from the mains power.
• Remove the front panel 5 I.
• Remove the OLD Pre Filter 6, HEPA lter 7 and Carbon lter 8 from the device II.
Attach the NEW Pre Filter 6 to the velcro side of the NEW HEPA lter 7.
• Place the NEW lters in the device III, observing the correct sequence: Carbon lter 8,
HEPA lter 7 and Pre Filter 6.
• Place the front panel 5 back on the device IV and click it into place.
Cleaning the device
• Clean the device regularly.
• Press the POWER button C on the control panel 3 to put the device in standby mode,
remove the power plug from the mains power.
• Never immerse the device in water or any other liquid.
• Clean the power cable and device with a damp cloth.
• Check the device’s air outlet for dust and dirt. Remove dust and dirt carefully by
vacuuming (vacuum cleaner) the dust and dirt from the air inlet and outlet (open grid).
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool;
these damage the device and will scratch and damage the surface of the device.
• Thoroughly dry the power cable and device.
• Store the device in a dry place.
10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Dutch Originals DO-CE-APFH01-W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info