Bedienungsanleitung Duux DXHCF02 Stream (Seite 5 von 41) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

773962

Zoom out

Zoom in

Vorherige Seite

1/41

Nächste Seite

Oscillation

Oscillation is deactivated when using the device for

the rst time. By pressing the key,

the device will automatically oscillate horizontally

up to 80 degrees. The indicator on the display will

illuminate accordingly. The verticale angle can be

adjusted manually in 4 positions, up to 90⁰.

Heating mode

Heating mode is deactivated when using the

device for the rst time. Press the key to turn

on the heating mode. Once pressed, the heating

mode will start in Medium (2) speed mode and

the corresponding indicator on the display will

illuminate. Pressing again will increase the heating

power to High (3) speed mode.

Note: It’s not possible to manually adjust the

speed of the heating mode. When pressing the

key, the device will return in cooling mode.

Pressing this key again will activate ECO mode.

When the room temperature is below 18⁰C,

the High (3) speed heating mode will turn on

automatically. When the room temperature

is between 18⁰C and 22⁰C, the Low (2) speed

heating mode will be activated. When the room

temperature is above 22⁰C, the heating mode

will deactivate and the fan will stop working. To

Power

Touch the key to switch on the device. The

display will illuminate and operate in cooling mode

at low wind speed by default. Press again to switch

o in stand-by mode.

Note: Make sure the stand-by switch is in |

position in order to switch on the device. If the

stand-by switch is in O position, all buttons are

disabled.

Change speed

Press the key to increase or decrease the wind

speed in the following sequence: Low (1) > Medium

(2) > High (3) > Strong (4). Default setting is Low

(1) speed. The icons of the LED display will change

accordingly.

Timer

Timer is deactivated when using the device for the

rst time. Press the key to activate the timer

mode. You can switch the timer in the following

order: 1h > 2h > 4h > 8h. The corresponding

indicators will illuminate on the display. You can

also read the timer count down on the display (e.g.

if 4h timer is activated, the display will change to 2h

after 2h, and so on). After the timer is completed,

the device will switch to stand-by mode.

continue in cooling mode, switch on the fan by

pressing the button. Pressing this key for a 4th

time will return to cooling mode.

Natural wind & night mode

Night mode is deactivated when using the device

for the rst time. Press the key to activate

natural wind & night mode. The corresponding

indicator will illuminate on the display. Press again

to deactivate this mode.

Note: The natural wind & night mode cannot be

used in combination with the heating mode. Once

natural wind & night mode is activated, pressing the

heating mode key will automatically deactivate the

natural wind & night mode.

The natural wind & night mode works according to

the below programming:

Time (Sec) Time=90s

Mid

Low

Time (Sec) Time=90s

Mid

Low

Time (Sec) Time=90s

Mid

Low

6 6 12 15

6 6 6 6 6

3 33

12 6 6 6

6 6 6 6

6 6

6 6 6

6 6

Natural wind & night mode in HI speed

Natural wind & night mode in MID speed

Natural wind & night mode in LOW speed

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Duux DXHCF02 Stream Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info