Bedienungsanleitung Duux DXHU05 (Seite 6 von 47) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

732730

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

1110

Ambient light

Press the button to active the ambient light.

Press again to deactivate.

WIFI mode

Press and hold the button for 5 seconds to

activate the WIFI mode. The indicator will quickly

disappear and then ash rapidly (searching for

devices to pair)

WIFI and APP operation

Scan below QR code to download the Duux APP

or search DUUX APP in the App Store or Google

Play Store to start the procedure to download the

APP. Once installed, enter your e-mail address and

complete the registration.

Connect to WIFI

Once registered, click “add duux device” on the

main screen or use the “+” button in the top

right corner to add a new device.,

Search for “Beam” and press to continue

Connect to your preferred WiFi network and

enter the corresponding password

Follow the instructions in the app to complete

the pairing process.

APP STORE PLAY STORE

Auto mode

Press the button to activate the self-regulating

hygrostat. The mist output intensity will now

self-regulate according to the ambient relative

humidity. Press multiple times to change the

desired humidity in the following order: 40% > 45%

> 50% > 55% > 60% > 65% > 70% > 75% > 80% >

85% > 90% > ACTUAL HUMIDITY > 40% > 50% > ...

and so on. Each press will increase with 5%. Once

released, the selected humidity will blink 3 seconds

to conrm your choice.

When the hygrostat is set above the actual

humidity, the device will operate in high speed until

the desired humidity has been reached. When

the hygrostat is set below the actual humidity, the

device will not humidify. After setting the hygrostat,

the display will show the ambient relative humidity.

Timer

Press the key to activate the timer setting. With

every touch the timer will increase with one hour in

the following sequence: 1h > 2h > 4h > 8h > OFF.

Once the timer is activated, the device will

automatically shut down after the set timer has

been completed.

Power

Press the power button to switch on the device.

The corresponding indicator will light up on the

display and the ambient light will switch on. The

WIFI indicator will blink to look for devices to

pair. The monitoring screen will show the actual

temperature and humidity every 5 seconds. Press

again to switch o the device (the device will

remain in stand-by mode until the plug is removed

from the wall outlet). The default humidity setting is

MEDIUM output.

Note: you can also switch on the device with

the touch button on the device, located behind the

control panel / remote control.

Increase /

decrease mist output

Press the button increase the mist output.

The mist output level bars will change accordingly.

Pressing the button will decrease the mist

output. The are three mist output levels:

LOW , MEDIUM ,

HIGH

Note: The mist output setting will not cycle

when pressing or button multiple times.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Duux DXHU05 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info