773952
7
Zoom out
Zoom in
Vorherige Seite
1/53
Nächste Seite
1312
4. Functions
On/O (power)
Speed (ventilation)
Timer indicator
Timer
Night mode
Night mode indicator
Select mode
Temperature up
Temperature down
Indicator for compressor operation
Full Water indicator
1
1
10
10
11
12 13 14 15 16 17 18 19 20
2
2 4 5 8 9
11
12
13
14
15
16
17
19
18
20
3
3 6 7
4
5
6
7
8
9
Low ventilation indicator
Middle ventilation indicator
High ventilation indicator
Receiver for remote control
LCD display
Auto mode indicator
Dehumidifying mode indicator
Cooling mode indicator
WiFi button/indicator
Fan mode indicator
WiFi button
21 22
21
EN
22
Power switch
Press the ON/OFF button and the unit will start.
If the ambient temperature is:
Higher than 22⁰C, the unit will operate in
cooling mode.
Higher than 20⁰C but below or equal to 22⁰C,
the unit will operate in ventilation mode.
Indicators of the functions in progress are
shown simultaneously.
Note: The display window shows the ambient
room temperature from 0⁰C to 50⁰C.
To turn the unit o, press ON/OFF button again
Select operation mode
Press the MODE button to select the preferred
operation mode: automatic, cooling, fan or
dehumidify. The indicator of your selected mode
will illuminate.
Cooling mode
When the air conditioner is in cooling mode, it
cools the room. The compressor is then switched
on. When the air conditioner has reached the
desired temperature, it will switch to ventilation
mode.
Ventilation mode
In ventilation mode, the air conditioner will only
ventilate. It circulates the air in the room, which has
a cooling eect. The compressor will not switch on
in this mode.
Automatic mode
When the AUTO mode is active, the ventilation
speed is automatically selected based on the
ambient temperature (the relevant indicator lights
up). The SPEED button is locked in AUTO mode.
Setting the temperature
Press ‘Temperature up’ or ‘Temperature down’
button to regulate the temperature according
to your preference.
The display window will show the desired
temperature as you press ‘Temperature up’ or
‘Temperature down’ button. In stand-by mode,
it will always show the ambient temperature.
The default factory setting of this machine is
24⁰C for cooling.
1
1
2
2
3
3
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Duux DXMA05 Blizzard wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info