Bedienungsanleitung Duux DXPU03 (Seite 7 von 43) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

732846

Zoom out

Zoom in

Vorherige Seite

1/43

Nächste Seite

1312

Ionizer

This device comes with a built-in ionizer. The

ionizer released negative ions to capture tiny

airborne particles and pull them inside the lter.

The ionizer is ON by default and can only be

switched o by using a mobile device connected to

the WIFI mode.

Night mode

Once the device is set in auto mode, the LED

indicators and display will automatically turn o

after 10 minutes. Press any button to reactivate the

controls and display.

the lter depends on the air quality and usage of

the device (approx. 4-6 months (art. no. DXPUF03)

Note: Please dispose used lters as non-

combustible garbage.

PM2.5 laser sensor

The PM2.5 laser sensor is situated inside the

handle on the back-side of the device. To remove

dust from the sensor, use a vacuum cleaner with

soft brush extension to gently clean the sensor.

Maintenance before storage

Switch o the device and remove the plug from

the wall outlet

Cover the device with a plastic bag, and keep

in a dry place. Always store it upright as

placement in a at or reverse manner may

cause a fault to the device.

Spare parts

Spare parts and accessories can be requested at

the point of purchase or local distributor

Search for “Tube” and press to continue

Connect to your preferred WiFi network and

enter the corresponding password

Follow the instructions in the app to complete

the pairing process.

Ambient light sensor

The ambient light sensor will automatically adjust

the brightness of the LCD screen according the

ambient light. No manual operation is required.

Filter

The HEPA lter cleans the air from smaller

particles. The activated carbon lter removes

harmful gases and toxics such as smoke,

chemicals, VOC’s and bacteria’s

PM2.5 laser sensor

The pollution degree of the air is sensed by the

sensor, and the pollution condition is displayed by

means of the indicator light of air pollution degree.

In the AUTO speed mode, the device automatically

selects the optimal speed according

to the pollution degree. Sensed pollutants: PM2.5,

dust, pollen, mold, pet dander. PM2.5 is measured

in microgram per cubic meter, shown on the

display as ug/m³

Important: Be sure to remove the power plug

from the outlet before carrying out maintenance.

Important: Do not soak or immerse the power

plug or the device in water.

Important: We recommend weekly

maintenance for optimal eciency.

Cleaning

• Please use soft dry cloth to wipe dust o the

body; If the surface is too dirty, it is better to wipe

it clean with a damped cloth mixed with neutral

detergent.

• Don’t use gasoline, thinner and any others

chemical substances as it will easy damage the

surface.

Pre-lter

To remove large dust particles on the pre-lter

body, use a vacuum cleaner with soft brush

extension to gently clean the surface.

HEPA- and activated carbon lter

The lter replacement indicator will let you know

when it’s time to replace your lter. The lifespan of

4. Maintenance

replacement

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Duux DXPU03 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info