Bedienungsanleitung Dyson Ball (Seite 8 von 16) (Englisch)

702345

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

Using your Dyson appliance

Please read the ‘Important Safety Instructions’ in this Dyson

operating manual before proceeding.

Assembly

• Lay the appliance on its back.

• Attach the cleaner head by sliding it on to the connections on the

lower front part of the ball. Ensure the electrical plug on the cleaner

head fits into the twin-block connection on the body of the appliance,

which is directly above the airway. Push firmly: the cleaner head will

click into place.

• Stand the appliance up straight.

• Attach the wand and handle into the hose.

• Lower the handle onto the top of the appliance until it clicks and slide

the wand into the hose.

• Slide tool holder A onto the side of the duct as shown.

• Clip tool holder B on the appliance above the switches as shown.

• Attach the tools as shown. In use, the tools can be attached to either

the hose or the wand.

• Wind the cable around the cable hooks. Secure with the clip.

Operation

• Unwind the cable.

• Plug the appliance into the mains electricity supply.

• To switch ‘ON’ or ‘OFF’ press the red power button, located

as shown.

• To use, recline the handle. The stabiliser stand will automatically

lift up.

• After use, return the appliance to the upright position, pushing it

firmly into place. The stabiliser wheels will automatically lower.

• Then unplug the appliance, coil the cable safely and put the

appliance away.

• Switch ‘OFF’ the appliance, unplug and ensure it is upright before:

– Changing or using tools.

– Removing the hose or airway inspection parts.

• Use the cyclone carry handle to carry the machine.

Direct drive cleaner head with suction control

• This cleaner head is used for testing with the European Regulations:

No. 665/2013 and No. 666/2013. Tested in Maximum suction for

ground in dust and debris (+) level.

Cleaner head maintenance

Maximum suction for ground in dust and debris (+)

• For vacuuming durable floor coverings, hard floors and heavily

soiled carpets and rugs.

– To switch to this setting, move the suction control slider on top of

the cleaner head.

– Before vacuuming your flooring, rugs and carpets, check the

manufacturer’s recommended cleaning instructions.

Suction for dust and debris (▲)

• For vacuuming of lightly soiled carpets, rugs and hard flooring.

• For vacuuming of large debris such as peanuts or rice.

– Your appliance is pre-set to this level of suction when you take it

out of the box.

Suction for deep pile carpets and delicate flooring (-)

• For vacuuming deep pile carpets or rugs and any flooring on which

you may experience greater resistance.

• For vacuuming of lightly soiled floors, including delicate flooring such

as vinyl, parquet and lino.

– To switch to this setting, move the suction control slider on top of

the cleaner head.

Attachments

• To release the wand, open the cap and slide the wand straight up

until the wand and handle release from the top of the appliance.

• Should you wish to use the hose without the wand, follow the above

instruction and press the silver button to release the wand from

the hose.

Carpets or hard floors

• The brush bar will always default to ‘ON’ (spinning) each time you

switch the appliance ‘ON’ and recline it for cleaning.

• The brush bar will not rotate when the appliance is upright.

• To switch the brush bar 'OFF' (e.g. for hard surfaces, delicate rugs

and delicate flooring):

– Switch the appliance ‘ON’.

– Recline the appliance.

– Press the brush bar ‘ON/OFF’ button – the brush bar will

stop spinning.

• The brush bar will automatically stop if it becomes obstructed. See

‘Brush bar – clearing obstructions’.

• Before vacuuming your flooring, rugs and carpets, check the

manufacturer’s recommended cleaning instructions.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dyson Ball Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dyson Ball

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info