Bedienungsanleitung Dyson dc 02 (Seite 1 von 2) (Englisch)

319302

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

To empty clear bin, pull back release catch under carrying handle

and raise top of machine.

Lift clear bin out of machine. Remove cyclone top (lid).

Wrap a plastic bag

tightly around the rim

of the clear bin.

Self adjusting

Floor tool

Fit floor tool by pushing

firmly into end of wand.

Tool storage

Press yellow release catch to open the tool

storage cover and insert required tool into

end of wand or wand handle. Please

note that tools may feel warm when

machine has been running; this is

perfectly normal.

Clear bin full mark

Note: Do not fill above this line.

Sits securely

on the stairs

However, always

work above the

machine on stairs for

your own safety.

Do not use strong

detergents and ensure

clear bin is fully dry before

replacing in machine.

Note: The yellow bin inner

should not be removed from

the bin when it is cleaned.

2. Clear bin removal

On/off switch

Press left switch.

Cord rewind

Press right switch for cord rewind.

1. Hose & wand

assembly

Assemble hose and wand by fitting

together at joints ∂, ∑, and ∏. Push

yellow cuffs in until both buttons ‘click’

into place.

Press buttons and pull hose to release.

Telescopic wand

Press yellow button and

slide wand down to

adjust length.

max

The plug is situated

underneath the tool

cover on the right

hand side.

click

OPTIONAL

click

3Blockage procedure

Please note: Any ‘Blockage only’ repairs will incur a

charge of $60.00*

. Please check your machine carefully.

Check filters, replacing S-level if older than 3 months

and HEPA if older than 12 months, or if filters are heavily

coated with dust.

*Price correct at time

of printing.

4. Remove floor tool from

wand πand check for

blockage.

2. Check wand handle swivel

by pressing yellow buttons and

pulling hose from wand. Clear

any debris.

5. Check air intake hole and check ramp.

Invert clear bin and wait at least

10 seconds before releasing.

Wipe shroud holes

free of all dust/debris.

max

Replace clear bin and cyclone

top and close machine.

Ensure release catch

‘clicks’ into position before

using the vacuum cleaner or

lifting the machine by the

carrying handle.

2 3

4 5

6 7

Changing filters

Your DCO2 is fitted with one H-level electrostatic cartridge

filter and one HEPA filter.

Insert top H-level electrostatic filter ensuring that it fits

snugly against the black rubber seal on the machine.

Slide purple HEPA filter into the grooves and push it

down fully.

Automatic suction control trigger

Hold the yellow trigger down to reduce suction for

upholstery and curtains.

To maintain reduced suction, press the trigger down

hard until it clicks. To unlock and resume full suction,

press down the opposite end of the trigger.

1 3

WARNING! For your own safety please

remember to unplug the machine when not in

use and before carrying out maintenance.

3. Check wand joint

by pulling wand

and wand handle

apart. Clear any blockage

with rod or wire.

1. Check entry swivel ∂by

pressing yellow buttons &

pulling out hose.

Clear any debris.

IMPORTANT Use only genuine Dyson filters.

221 H-level

1 HEPA

Wand

handle Wand

H-Level

Absolute

HEPA

Bactiguard

DC02 ABS Operating Manual 30-08-1999 14:25 Page 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Dyson dc 02 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dyson dc 02

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info