Bedienungsanleitung Dyson V8 (Seite 12 von 20) (Englisch, Spanisch)

665103

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

USING YOUR DYSON MACHINE

PLEASE READ THE “IMPORTANT SAFETY INSTRUCTIONS” IN THIS DYSON

OPERATING MANUAL BEFORE PROCEEDING.

OPERATION

• Do not use outdoors or on wet surfaces or to vacuum water or other liquids –

electric shock could occur.

• Ensure the machine remains upright in use. Dirt and debris may be released if it

is turned upside down.

• Do not operate while checking for blockages as doing so could result in

personal injury.

• For domestic indoor and car use only. Do not use it while the car is in motion or

while driving.

• To operate the MAX mode, locate the switch on the top of the appliance. Slide

the switch to the Max mode position.

• To switch off MAX mode, slide the red switch back to the Powerful Suction

mode position.

• This machine has carbon fiber brushes. Take care if coming into contact with

them, as they may cause minor skin irritation. Wash your hands after handling

the brushes.

DIAGNOSTICS – LIGHTS DURING CHARGING

DIAGNOSTICS – DURING USE

DOCKING STATION INSTALLATION

• Use appropriate mounting hardware for your wall type and ensure that the

docking station is mounted securely. Ensure no pipe work (gas, water, air) or

electrical cables, wires or ductwork are located directly behind the mounting

area. The docking station must be mounted in accordance with regulations

and applicable codes/standards (state and local laws may apply). Dyson

recommends the use of protective clothing, eyeware and materials when

installing the docking station.

CARPETS OR HARD FLOORS

• Before vacuuming your flooring, rugs and carpets, check the manufacturer's

recommended cleaning instructions.

• The brush bar on the machine can damage certain carpet types and floors.

Some carpets will fuzz if a rotating brush bar is used when vacuuming. If this

happens, we recommend vacuuming without the motorized floor tool and

consulting with your flooring manufacturer.

• Before vacuuming highly polished floors, such as wood or linoleum, first check

that the underside of the floor tool and its brushes are free from foreign objects

that could cause marking.

LOOKING AFTER YOUR DYSON MACHINE

• Do not carry out any maintenance or repair work other than that shown and

described in this Dyson Operating Manual, or advised by the Dyson Helpline.

• Only use parts recommended by Dyson. If you do not this may invalidate

your warranty.

• Store the machine indoors. Do not use or store it below 37.4°F (3°C). Ensure the

machine is at room temperature before operating.

• Clean the machine only with a dry cloth. Do not use any lubricants, cleaning

agents, polishes or air fresheners on any part of the machine.

VACUUMING

• Do not use without the clear bin and filters in place.

• Fine dirt such as plaster dust or flour should only be vacuumed in very

small amounts.

• Do not use the machine to pick up sharp hard objects, small toys, pins, paper

clips, etc. They may damage the machine.

• When vacuuming, certain carpets may generate small static charges in the

clear bin or wand. These are harmless and are not associated with the central

electricity supply. To minimize any effect from this, do not put your hand or

insert any object into the clear bin unless you have first emptied it. Clean the

clear bin with a damp cloth only. (See “Cleaning the clear bin”.)

• Use extra care when cleaning on stairs.

• Do not rest the machine on chairs, tables, etc.

• Do not press down on the nozzle with excessive force when using the machine as

this may cause damage.

• Do not leave the cleaner head in one place on delicate floors.

• On waxed floors the movement of the cleaner head may create an uneven

luster. If this happens, wipe with a damp cloth, polish the area with wax, and

wait for it to dry.

EMPTYING THE CLEAR BIN

• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.

• Ensure the machine is disconnected from the charger before emptying the clear

bin. Be careful not to pull the “ON” trigger.

• To make emptying the clear bin easier, it is advisable to remove the wand and

floor tool.

• To minimize dust/allergen contact when emptying, encase the clear bin tightly in

a plastic bag and empty.

• To release the dirt, hold the appliance by the handle, pull the red lever back and

lift upwards to release the cyclone. Continue until the bin base automatically

opens and releases the dirt.

• Remove the clear bin carefully from the bag.

• Seal the bag tightly, dispose as normal.

• To close, push the cyclone downwards until it is in the normal position and

manually close the base of the bin – the base will click when it is securely

in place.

CLEANING THE CLEAR BIN

• Ensure the machine is disconnected from the charger before removing the clear

bin. Be careful not to pull the “ON” trigger.

• Remove the wand and floor tool.

• To remove the cyclone, hold the appliance by the handle, pull the red lever

towards you and lift upwards until the bin opens, then push in the red button

located behind the cyclone and lift the cyclone out.

• To detach the clear bin from the appliance, pull back on the red catch located

at the base, slide the clear bin down and carefully remove forwards from the

main body.

• Clean the clear bin with a damp cloth only.

• Do not use detergents, polishes or air fresheners to clean the clear bin.

• Do not put the clear bin in a dishwasher.

• Ensure the clear bin is completely dry before replacing.

• To replace the clear bin, align the tabs on the clear bin with the grooves on the

main body and slide upwards into place until the catch clicks.

• Slide the cyclone into the grooves of the main body and push downwards until

it is in its normal position and manually close the base of the bin – the base will

click when it is securely in place.

WASHABLE PARTS

Your appliance has washable parts, which require regular cleaning. Follow the

instructions below.

Charging from low.

Charging, nearly full.

Charger fault – call the Dyson Helpline.

Charging, medium charge.

Fully charged.

Battery fault – call the Dyson Helpline

High level of charge.

Low level of charge.

Battery fault – call the Dyson Helpline

Medium level of charge.

Empty – please recharge.

Main body fault – call the Dyson Helpline.

Dyson V8 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Dyson V8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info