Bedienungsanleitung Easy at Home EBP-095 (Seite 14 von 14) (Englisch)

741702

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Table 4 Guidance and MANUFACTURER’s declaration – electromagnetic IMMUNITY –

for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Guidance and manufacturer’s declaration – electromagnetic immunity

IMMUNITY test

3 Vrms

3 V/m

Compliance

level

IEC 60601

TEST LEVEL

Conducted RF

IEC 61000-4-6

Radiated RF

IEC 61000-4-3

3 V/m

80 MHz to

2.5 GHz

3 Vrms

150 kHz to

80 MHz

Electromagnetic environment -

guidance

Portable and mobile RF communications

equipment should be used no closer to

any part of the device, including

cables, than the recommended

separation distance calculated from the

equation applicable to the frequency of

the transmitter.

Recommended separation distance

The device is intended for use in the electromagnetic environment specified below.

The customer or the user of the device should assure that it is used in such an environment.

where P is the maximum output power

rating of the transmitter in watts (W)

according to the transmitter manufacturer

and d is the recommended separation

distance in metres (m).

Field strengths from fixed RF

transmitters, as determined by an

electromagnetic site survey, should be

less than the compliance level in each

frequency range.

Interference may occur in the vicinity of

equipment marked with the following

symbol:

P=d

80 MHz to 800 MHz

P=d 2.333

800 MHz to 2,5 GHz

1.167

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic

propagation is affected by absorption and reflection from structures, objects

and people.

Field strengths from fixed transmitters, such as base stations for radio (cellular /

cordless) telephones and land mobile radios, amateur radio, AM and FM radio broad-

cast and TV broadcast cannot be predicted theoretically with accuracy. To assess the

electromagnetic environment due to fixed RF transmitters, an electromagnetic site

survey should be considered. If the measured field strength in the location in which

the device is used exceeds the applicable RF compliance level above, the device

should be observed to verify normal operation. If abnormal performance is observed,

additional measures may be necessary, such as re-orienting or relocating the device.

Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.

1.167

150 kHz to 80 MHz 80 MHz to 800 MHz 800 MHz to 2.5 GHz

Table 6 Recommended separation distances between portable and mobile

RF communications equipment and the ME EQUIPMENT or ME SYSTEM –

for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING

Recommended separation distances

between portable and mobile RF communications equipment and the device.

The device is intended for use in an electromagnetic environment in which

radiated RF disturbances are controlled. The customer or the user of the device

can help prevent electromagnetic interference by maintaining a minimum distance

between portable and mobile RF communications equipment (transmittters) and the

device as recommended below, according to the maximum output power of the

communications equipment.

Rated maximum output

power of transmitter

(W)

Separation distance according to frequency of transmitter (m)

For transmitters rated at a maximum output power not listed above, the recommended

separation distance d in metres (m) can be estimated using the equation applicable to

the frequency of the transmitter, where P is the maximum output power rating of the

transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 At 80MHz and 800MHz, the separation distance for the higher frequency

range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation

is affected by absorption and reflection from structures, objects and people.

0.01

0.1

100

0.117 0.117

0.369

1.167

3.690

11.67

0.233

0.738

2.333

7.378

23.33

P=d

P=d 1.167

2.333

P=d

0.369

1.167

3.690

11.67

1.167

EMC GUIDANCE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easy at Home EBP-095 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info