Bedienungsanleitung Easymaxx HDY01A0 - Z03532 (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

703733

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN Instructions

Customer Service / Importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany • ✆ +49 38851 314650 *)

*) Calls to German landlines are subject to your provider’s charges.

Device Overview

Check the items supplied for completeness and possible transport

damage. If you should ﬁ nd any transport damage, do not (!) use the

device, but contact the customer service department immediately.

1 LED projector

2 Motif template (6 x)

3 Locking screw

4 Projector holder

5 Base

6 Template holder

7 Ground spike

8 Template mount (in the

projector housing)

9 Mains adapter

10 Lens unit

Not shown:

• Nut

Rear View

11 Rotation On / Oﬀ button

12 Speed switch / On / Oﬀ switch:

left – 200 sec. per revolution

middle – Oﬀ

right – 60 sec. per revolution

Setting Up and Using the Projector

PLEASE NOTE!

■ Do not leave the device switched on for longer than 24 hours. It

is not suitable for continuous operation.

1. Screw the projector holder (4) to the base (5) to set it up or to

the ground spike (7) to anchor it in the ground.

2. Screw the LED projector (1) securely to the projector holder (4)

using the locking screw (3) and the nut. Note the alignment of

the LED projector (1) when you do this.

3. Set up the LED projector (1) no more than 10 metres away from

the object which is to be illuminated. When using the ground

spike (7), anchor it ﬁ rmly in the ground.

4. Adjust the alignment of the LED projector (1) again if neces-

sary.

5. Insert the motiv template (2) that

you want into the template hold-

er (6).

Important:

Make sure that the

two pins on the motif template sit

in the recesses which are provid-

ed for them in the template holder.

6. Insert the template holder with the

inserted template into the template

mount in the projector housing (8).

Important: Make sure the template

holder is in the correct position for

the insertion of the template (see

picture).

7. Plug the cable connector into the

socket on the mains adapter (9) that

is also supplied and screw the cap

nut onto the thread of the mains

adapter.

8. Connect the mains adapter to a properly installed plug socket.

9. To switch on the device, ﬂ ip the speed switch / On / Oﬀ

switch (12) to the left or right.

The Rotation On / Oﬀ button (11) can be used to acti-

vate or deactivate the rotation of the motifs.

10. To switch oﬀ the device, ﬂ ip the speed switch / On / Oﬀ

switch (12) to the middle.

Cleaning and Storage

PLEASE NOTE!

■ Do not use any corrosive or abrasive cleaning agents to clean

the device. These could damage the surface.

• Make sure that the lens unit (10) is always clean. You should

therefore clean it with a damp cloth from time to time.

• Store the device in a dry place that is protected from sunlight

and is not accessible to children and animals when you are not

using it.

Technical Data

Article number: 03532

ID instructions: Z 03532 M DS V2 0719

Projector

Model number: HDY01A0

Voltage: 5 V DC

Power: 7.5 W (max.)

Protection class: III

Type of protection: IP64

Risk group in

accordance with

DIN EN 62471:2008: 2

Mains adapter

Model number: LSDA02-AC/DC

Voltage:

– IN: 100 – 240 V ~ 50 / 60 Hz

– OUT: 5 V DC; 1.5 A

Protection class: II

Type of protection: IP44

Disposal

Dispose of the packaging material in an environmentally

friendly manner and take it to a recycling centre.

This device is governed by the European Directive

2012/19/EU on waste electrical and electronic equipment

(WEEE). Do not dispose of this device as normal domestic

waste, but rather in an environmentally friendly manner via

an oﬃ cially approved waste disposal company.

Article number: 03532

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easymaxx HDY01A0 - Z03532 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info