Bedienungsanleitung Easymaxx I2189 - Z03505 (Seite 3 von 8) (Deutsch, Englisch, Holländisch, Französisch)

703731

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN Instructions

Dear Customer,

We are delighted that you have chosen this LED light box. If you

have any questions, contact the customer service department via

our website:

www.service-shopping.de

Explanation of Symbols

Safety instructions: Read carefully and follow to prevent

personal injury and damage to property.

Circuit symbol for direct current

Supplementary information

Protection class III

Read operating instructions before use!

Intended use

• This article is suitable for use as a decorative feature indoors.

• The article is not a toy!

• The article is for personal use only and is not intended for com-

mercial applications.

• The article should only be used as described in these instruc-

tions. Any other use is deemed to be improper.

• The following are excluded from the warranty: all defects

caused by improper handling, damage or unauthorised at-

tempts at repair. This also applies to normal wear and tear.

Safety instructions

■ Warning of suffocation! Keep children and animals away

from the packaging material.

■ Children must be supervised in order to ensure that they do not

play with the article.

■ Warning of acid burns from battery acid! Batteries can be

deadly if swallowed. Therefore keep batteries and the article

out of the reach of children and animals. If a battery is swal-

lowed, seek medical assistance immediately.

■ Beware of acid burns from battery acid! If a battery has

leaked, do not allow your skin, eyes and mucous membranes

to come into contact with the battery acid. If you touch battery

acid, rinse the affected area with abundant fresh water

immediately and contact a doctor as soon as possible.

■ Before inserting the batteries, check whether the contacts on

the article and on the batteries are clean, and clean them if

necessary.

■ Use only the battery type speciﬁ ed in the technical data.

■ Always replace all batteries together. Do not use batteries of

different types or brands, or batteries with different capacities.

When replacing batteries, ensure the correct polarity (+ / –).

■ Remove the batteries when they are dead or if you will not be

using the article for a prolonged period. This will prevent any

damage if a battery leaks.

■ Remove a dead battery immediately and clean the contacts

before you insert new batteries.

■ The batteries must not be recharged or reactivated by other

means, dismantled, thrown into a ﬁ re, immersed in ﬂ uids, or

short-circuited.

■ Use suitable fastening material to hang up the article. If you

are unsure which fastening material is suitable for your wall,

seek advice from a specialist stockist.

■ Install the article at a safe place on a dry surface, a sufﬁ cient

distance away from heat sources, for example ovens and heat-

ing systems.

■ Before drilling, ensure that there are no pipes or cables behind

the intended drilling point.

■ Do not place any heavy objects on the article.

■ Do not place any containers ﬁ lled with liquid, for example vas-

es, on or directly next to the article.

■ Never immerse the article in water or other liquids! It is only

protected against splashing.

■ Never touch the article with damp or wet hands.

■ Make sure that the USB cable does not become squashed or

bent and does not come into contact with hot surfaces.

■ Protect the article from heat, naked ﬂ ames, extreme tempera-

tures, persistent moisture, wet conditions and collisions.

■ The article must not be used if it shows obvious signs of dam-

age.

■ The individual LEDs cannot be replaced.

Items supplied and article overview

Unpack all parts and check the items supplied for completeness

and possible transport damage. If you ﬁ nd any damage to the

components, do not use them (!), but contact our customer ser-

vice department.

1 Barrel connec-

tor input (on the

side)

2 On / Off switch

(on the side)

3 LEDs (10 x)

4 Letters and sym-

bols (173 x)

5 Battery compart-

ment (on the

back)

6 Rails

Not shown: 1 x USB cable (A connector to barrel connector)

1 x remote control, 3 V DC (1 x button cell,

CR2025 type), already inserted (The protective

strip must be removed)

Inserting / Changing the batteries

of the article

For battery operation, 6 x 1.5 V batteries, AA type are re-

quired. These are not supplied with the article.

1. Open the battery compartment (5): Grip and press down the

locking lug on the battery compartment cover. Lift up the cover

at the same time.

2. Take the used batteries out if necessary and insert 6 x 1.5 V

batteries of the AA type. Pay attention to the correct polar-

ity (+ / –).

3. Reattach the battery compartment cover and press it shut.

When you do this, make sure that the locking lugs sit in the

recesses which are provided for them. You must hear and feel

it engage.

Article number: 03505

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easymaxx I2189 - Z03505 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info