Bedienungsanleitung Easymaxx QOE-WYT01-12V - Z03470 (Seite 3 von 8) (Deutsch, Englisch, Holländisch, Französisch)

703749

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN Instructions

Article number 03470

Dear Customer,

We are delighted that you have chosen this air compressor.

Before using the device for the ﬁ rst time, please read the instruc-

tions carefully and keep them for future reference. If the device is

given to someone else, these instructions should also be handed

over with it. If you have any questions, contact the customer ser-

vice department via our website:

www.service-shopping.de

Explanation of Symbols

Protection class III

Read operating instructions before use!

Circuit symbol for DC voltage

Intended Use

• This air compressor is used to ﬁ ll tyres, tubes, balls, air mat-

tresses etc. with air.

• CAUTION! The display only shows approximate values. Check

the compressed air in car tyres using a professional air pres-

sure gauge.

• The device should only be used as described in these instruc-

tions. Any other use is deemed to be improper.

• The device is for personal use only and is not intended for com-

mercial applications.

• The following are excluded from the warranty: all defects caused

by improper handling, damage or unauthorised attempts at re-

pair. This also applies to normal wear and tear.

Safety Instructions

■ Danger of suffocation! Keep children and animals away from

the device, the mains cable and packaging material.

■ The device is not a toy.

■ Danger of injury! Never breathe in the air which emerges from

the compressor, never place the valve connector / compressed

air tube in your mouth, nose or other oriﬁ ces.

■ Before using the device, ensure that the power socket in

the vehicle is designed for min. 10 A and if possible that no

other consumers are in operation to prevent any overloading

of the circuit.

■ Keep the device, the mains cable and the plug away from water

or other liquids in order to avoid electric shocks.

■ Danger of bursting! Do not overﬁ ll objects! Find out the maxi-

mum pressure before pumping anything up and set this on the

device.

■ Check the device for damage before putting it into operation. If

the device, the mains cable or the plug shows visible signs of

damage, the device must not be used. Do not use the device if

it has malfunctioned or been dropped in water.

■ Do not make any modiﬁ cations to the device. Have the repairs

performed only in a specialist workshop. In the event of any

damage, please contact our customer service department.

■ Do not use the device if ﬂ ammable substances are present in

the air.

■ This device will become hot during use! Flammable objects in

the immediate vicinity of the device could ignite! The device

may neither come into contact with combustible materials, nor

be used close to combustible materials such as cardboard or

paper.

■ Ensure prior to each use that the ventilation slots of the device

are clear.

■ Unwind the mains cable fully before connecting up the device.

■ Make sure that the connected mains cable does not present

a trip hazard, is not squashed (trapped in a door) or bent, and

does not come into contact with sharp edges or hot surfaces

(also of the device).

■ To ensure that the motor of the device does not overheat,

switch it off for at least 15 minutes after a maximum of 5

minutes of constant operation.

■ The device must always be disconnected from the mains power

when it is left unattended and before assembling, disassem-

bling or cleaning the device.

■ Allow the device to cool down completely before storing it away.

■ Do not drop the device or subject it to any impacts.

■ Do not expose the device to extreme temperatures (over 50°C

or sub-zero temperatures), wide temperature ﬂ uctuations,

naked ﬂ ames, direct sunlight, moisture or wet conditions.

■ Use only original spare parts from the manufacturer.

■ Do not use any corrosive or abrasive cleaning agents to clean

the device. These could damage the surface. Wipe down the

device with a soft damp cloth if necessary.

Items Supplied and Device Overview

UNIT

. !!

1 LED

2 Valve connector

3 On-switch lock

on,

off

4 On switch

5 Grip

6 Socket

7 Compressed air tube

8 LED On/Off button

9 Display

10 Setting buttons:

UNIT choose unit: psi, bar,

kPa, kg / cm

+ / – increase / reduce target

air pressure

11 Adapter compartment

12 Mains cable with vehicle

plug

13, 14 Adapter (e.g. for balls)

Use

1. If one of the two adapters (13, 14)

is required, press down the closure

of the adapter compartment (11)

and ﬂ ip open the lid. Take out the

adapter.

2. Flip up the lever of the valve connec-

tor (2), insert the adapter (13, 14)

and then ﬂ ip the lever down again.

3. Connect the mains cable (12) to the

socket (6) of the compressor and the

vehicle plug to the cigarette lighter in

the vehicle. CAUTION: Make sure

that it is designed for min. 10 A!

Do not trap the mains cable (12) in

the door!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easymaxx QOE-WYT01-12V - Z03470 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info