Bedienungsanleitung Easymaxx TS-21633 - Z05486 (Seite 4 von 8) (Deutsch, Englisch, Holländisch, Französisch)

703738

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

EN Operating instructions

Customer Service / Importer:

DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •

✆ +49 38851 314650 *)

*) Calls to German landlines are subject to your provider’s charges.

Inserting / Changing Batteries

Before inserting the batteries, check whether the contacts are

clean and clean them if necessary.

1. Twist the lamp head (7)

anticlockwise and pull it out

of the housing (1).

2. Press together the two

locking lugs and take oﬀ the

battery compartment cover.

3. Remove any used batter-

ies and insert four batter-

ies (1.5 V D type) into the

battery compartment (2).

Ensure the correct polarity

(+ / –).

4. Place the battery compart-

ment cover on. It must

engage audibly.

5. Insert the lamp head into

the housing and twist it

clockwise to secure it in

place.

Replace the batteries when the power starts to wane.

The battery performance may be severely restricted in

temperatures well below freezing.

Positioning

When positioning the spotlight, bear in mind that the motion

detector only ever works in a dark environment.

Please Note: The spotlight is splashproof (IP65). Nevertheless,

we recommend installing it in a location outdoors where it is pro-

tected from rain to ensure that it works perfectly.

The spotlight can either be attached to the wall with the fastening

material that is supplied or be placed on the bracket (4).

Mounting with fastening material:

1. Detach the bracket from the spotlight by undoing the wing

screw (3).

2. Place the bracket against the wall and mark out three drill

holes.

3. Drill holes into the wall and place dowels in them.

4. Screw the bracket onto the wall.

5. Fix the spotlight on the bracket using the wing screw.

Alignment

The spotlight can be rotated 360° on the bracket (4) and be tilted

forwards and backwards.

Undo the locking screw (8) on

the bracket, rotate the spotlight

into the position you want and

ﬁ x it in place with the locking

screw.

Undo the wing screw (3), tilt the

spotlight to the angle you want

and ﬁ x it in place with the wing

screw.

Cleaning and Storage

• Clean the spotlight with a soft and damp cloth. Then thorough-

ly dry it.

• Take the batteries out of the spotlight before it is stored away

in a dry place that is protected from direct sunlight and is out of

the reach of children and animals.

Disposal

Dispose of the packaging material in an environmentally

friendly manner so that it can be recycled.

Batteries should be removed before disposing of the prod-

uct and disposed of separately from the product at suitable

collection points.

The product is governed by the European Directive

2012/19/ EU on waste electrical and electronic equipment

(WEEE). Do not dispose of the product as normal domestic

waste, but rather in an environmentally friendly manner via

an oﬃ cially approved waste disposal company.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easymaxx TS-21633 - Z05486 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info