EasyGuard IP200
3GPP/RTSP settings
The IP CAM is able to be viewed from a 3G mobile phone, for detailed settings
on the 3G mobile phone, please refer to Appendix E.
Users can disable the 3G mobile access ability in this page. After the
3GPP/RTSP feature is disabled, no 3G mobile phone is allowed to access the video
of the IP camera. When this is disabled, the rtsp stream with MPEG2 audio is still
working, please refer to Appendix F for more details about rtsp stream with MPEG2
audio.
When the 3GPP is enabled, the video frame rate, resolution and bandwidth for
3G mobile access could be set independently from the video settings for
CamView(PC) access. The maximum allowed resolution is 352x255 and maximum
allowed bandwidth is 256 kbps. When the audio is enabled for both 3GPP and
CamView(PC) and the video/audio is displayed in CamView, the audio will be
disabled in 3G mobile display.
The “Access URL” line is the url address for 3G mobile phone to input for seeing
the video of the IP camera. Different 3G mobile may need to input this url in different
way, detailed information could be found in the user manual of different 3G mobiles.
Please be noticed that usually public IP address is needed for the IP camera, so that
the 3G mobile could access the IP camera’s video.
The default setting is “Enable 3GPP/RTSP”.
Figure 3-12: 3GPP/RTSP enabled page
