Screen Saver: Off/1 min/3 min/5 min
Power Saver: Off/1 min/3 min/5 min
Format: No/Yes
Reset: No/Yes
Version: Displays current firmware version
VIDEO MODE
To record Video, verify the camera is in Video mode.
If the Video icon on your camera’s LCD screen is not showing,
press the Power/Mode Button repeatedly until it appears.
To start recording:
Press the Shutter/Select Button. The camera will emit one
beep and the Camera Status Lights will flash while recording.
To stop recording:
Press the Shutter/Select Button. The Camera Status Lights
stop flashing and the camera emits one beep to indicate
recording has stopped.
This camera automatically stops recording when the battery is
out of power. Your Video will be saved before the camera
powers OFF.
Recording times are dependant on resolution and frame rate
settings.
After reaching a max. video recording time (or file size*)
the camera will automatically stop. It can only be restarted
manually.
*FAT32 file system has a maximum single file size limit of 4GB.
4K/25fps: 8min. max. • 2.7K/30fps: 8min. max.
1080p/60fps: 20min. max. • 1080p/30fps: 29min. max.
PHOTO MODE
BURST PHOTO MODE
To capture a Photo, verify the camera is in Photo mode. If the
Photo icon on your camera’s LCD screen is not showing, press
the Power/Mode Button repeatedly until it appears.
To take a photo:
Press the Shutter/Select Button. The camera will emit the
camera shutter sound.
To capture a Burst Photo series, verify the camera is in Burst
Photo mode. If the Burst Photo icon on your camera’s LCD
screen is not showing, press the Power/Mode Button
repeatedly until it appears. In Burst Photo mode, your camera
takes 3 photos in 1.5 seconds.
