Important: Changes or modifications to this unit not approved by
manufacturer/Communication Authority could void your right to operate this unit. Your
communicator is set up to transmit a regulated Signal on an assigned frequency. It is
against the law to alter or adjust the settings inside the communicator to exceed those
limitations. Any adjustment to your communicator must be made by qualified
technicians.
QUICK GUIDE
1. Insert the battery
2. Charge the battery for approximately 6 hours before initial use
3. Turn it on
4. Choose a frequency channel (must be the same one for all devices)
5. Press the push-to-talk button to start the transmission.
Talk into the microphone. Release the button when you are finished talking.
Keep in mind other people on the same frequency channel can also listen
to the conversation!
TO BE SAFE AND SURE
·Never open the case of your device. No user serviceable parts inside.
·Never change or replace anything in your device.
Your device may interfere with TVs or radios, even when operating properly. To
determine whether your communicator is causing interference, simply turn it off. If the
interference ends, your device is causing it. Try to eliminate interference by moving
your communicator away from the receiver. If you cannot eliminate interference
completely, please stop using this device.
Hazardous Environments: Do not operate the communicator in hazardous
environments , explosion or fire may result. Do not operate the communicator near
unshielded electrical blasting caps. Under certain conditions, communicators can
interfere with blasting operations and may cause an explosion. Turn your
