Transmitting and Receiving
To use your communicator to communicate with others:
1.In Communicator Mode, the unit is continuously in RECEIVE mode.
2.Press and hold the Yellow Button and speak as you normally would, holding the
microphone about 2~3 inches away from your mouth.
3. When you are finished speaking, release the Yellow Button. You are now ready to
receive incoming transmissions. While receiving transmission, the R X icon appears
on the display.
Sending a Call Alert Tone
To send a Call Alert Tone, Press the Yellow Button twice in a rapid action. The Call
Alert Tone will be automatically transmitted for a factory-set fixed length of time. During
transmission, the Call icon appears on the display. You’ll hear a brief Call Alert Tone to
confirm operation. The communicator returns to standby mode when the Call Tone
sequence is complete. For optimum performance, make sure the ANTENNA is
pointing upright.
■VOX setting (Voice Operated Transmission)
Your communicator is equipped with an adjustable Voice Operated Transmitter(VOX)
that can be used for automatic voice transmission. In this convenient mode,
transmission is automatically initiated by speaking into the microphone. There is no
need to push the Yellow Button.
By press MENU button 3 times, screen will display VX character, character OF keep
flashing, press UP or Down button to choose on or off.
Press UP or Down button to select voice level( from 1 to 3 level) , by press PTT button
to confirm setting. VOX Default setting as off
• Time and weekday information in communication mode:
When you switch on the OkiDoki it will start the communication mode.
The screen will show the time and weekday information after 6 seconds automatically.
In the watch interface you can operate the communication functions by pressing the
MENU, SCAN, PTT, UP or DOWN buttons.
After finishing the operation the screen will show the time and weekday information
again.
