Bedienungsanleitung Easypix V912 (Seite 2 von 3) (Englisch)

583242

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Note: The micro SD memory card must be formatted before taking photographs. See the

following sections for more information.

5.3 Formatting the memory or micro SD card

1. Press the menu button ( ) in PHOTO or VIDEO mode.

2. Select the setup mode by press the right button.

3. Select the format icon by press the

( ) button and press the SHUTTER button to

confirm.

4. Select Internal memory / SD card then press the SHUTTER button.

5.4 Setting the resolution

The camera can be set to different resolutions.

1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by

( ) key

and press the SHUTTER to confirm.

Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536),

5M (2560 x 1920), 9M (3456x2592), 12M (4032 x 3024)

2. Six different resolutions will be displayed. Select the desired resolution by using the up or

down buttons and press the SHUTTER button to confirm the selection.

5.5 Taking photographs

1. Turn on the camera.

Depending on the distance to the object being photographed, use macro switch to adjust

the distance. Select the flower symbol ( ) if you wish to take a close-up photograph

(11cm –18cm).

If you wish to take video or photograph of surroundings or people (0.5m – infinity),set the

macro switch to normal mode ( ).

3. If you are not sure if there is enough lighting, turn the automatic flash( ) on by pressing

the flash button. (If the battery power is too low, the flash won’t be activated).

4. Use the LCD screen to aim the object you wish to take photograph.

Use the face detection to aim the people you wish to take photograph.

5. Press SHUTTER button and wait until the LCD display turn on again.

6. If ‘SMILE’ detection is ON, shutter will be activate automatically once a smile face is

detected

Caution: 1) Taking picture for fast-moving object is not recommended.

2) Image may be distorted when taking picture in a moving vehicle.

5.6 Zoom in and out

The camera can zoom in up to 8 times.

Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the

maximum zoom ratio.

5.7 Self-timer setting

You can use the self-timer function when you wish to take a photograph for yourself or when you

wish to take a photograph for an object which the camera must be as still as possible.

1. Set the camera to photo mode.

2. Press the MENU button ( ). The menu will appear.

3. Press the

( ) button to select Capture Mode and confirm by pressing the SHUTTER

button.

4. Press the

( ) button to set the delay time: 10S Timer.

5. Press the SHUTTER button to confirm. The self-timer function is now ready for use.

6. Aim at the object you wish to take photo.

7. Press the SHUTTER button to take a photograph.

The photo will be taken after the timer reaches the delay time that you pre-setted and the

camera will beep during the delay time.

5.8 Recording video clips

1. Press the MODE button to select the video clip mode( ).

2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the

SHUTTER button to confirm. Two resolution will be displayed.

VGA (640 x 480) QVGA( 320 x 240).

3. Press the SHUTTER button to start recording video, press the SHUTTER button again to

stop recording. The video clip will now be saved as an AVI file in the camera memory.

5.9 Playback photographs

1. Press the( ) button to get into playback mode.

2. Press the left or right buttons to see photographs.

3. In full screen display , press the

( )

button to zoom in the photo.

4. To view images in thumbnail, press the

( ) button.

5. To shift the image in zoom-in mode, press the SHUTTER button then use the

up/down/left/right buttons.

6. Press the MENU ( ) button in Playback mode, press and hold MENU button again until

the menu options displayed. Select SLIDE SHOW and slide show time then press the

ENTER button to confirm. The pictures saved in your camera or your micro SD card will be

displayed in sequence automatically. To stop slide show, press ENTER button again.

5.10 Playback video clips

1. When video clips are displayed, press the SHUTTER button to start playing the video and

press the SHUTTER button again to pause the playback.

2. press right button to fast forward or press left button to rewind.

3. Press the down button to stop.

4. Press the mode button to exit.

5.11 Delete photographs and video clips

You can choose to delete a single photograph / video clip, or delete all the photographs / video

clips in the memory.

Follow the instructions given below to delete photograph.

1. Press the ( ) button to enter the playback mode.

2. Press left or right button to select photograph/video clip to be delete.

3. Press the MENU/delete button（）and select Delete This Image(Video) / All .

4. Press the SHUTTER button ,then select OK to confirm.

5. Press the mode button to exit.

NOTE: Select “All” and Press the SHUTTER button to confirm, all the pictures and videos will be

deleted.

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files

for storage.

7. Specifications

Sensor 9.0 Mega pixel CMOS sensor

12.0 Mega pixels: (4032x3024)

9.0 Mega pixels: (3456 x 2592)

5.0 Mega pixels: (2560x1920)

3.0 Mega pixels: (2048x1536)

1.3 Mega pixels: (1280x960)

Image resolution

VGA: (640x480)

Lens F/2.8 f = 8.5mm

Focus range 0.5m. ~ Infinity

Macro mode 11cm – 18cm

Digital zoom 8x

Flash strobe Built-in ( Auto / force / off )

LCD display 2.7" TFT color display

White balance Auto / Daylight / Cloudy / Fluorescent / Tungsten

Video mode 20fps@VGA&30fps@QVGA with micro SD card

External memory card SD card supports up to 8GB

File format Picture: JPEG, Video: AVI

Self timer

10 seconds

PC interface USB 2.0

Power source 2xAAA alkaline batteries

8. System requirement

Operating system

Windows XP / Vista or above

Mac 9.x or X.x

CPU Pentium III or above

RAM At least 64MB

Interface USB port

CD 4x speed CD ROM or above

9. Troubleshooting

Problem

Cause

Solution

Cannot turn on the camera

Low battery power.

Battery placed at wrong

polarities.

Replace or install the battery

correctly.

Photos can not be saved

when taking pictures.

The memory card or built-in

memory hasn’t been

formatted properly.

Format the memory in setup

mode of the camera. Please

refer to section 5.3.

Cannot find removable disk

after connecting the

camera to the computer

Connection failure. Make sure all cable connections

are secured and restart the

computer if necessary.

Flash does not work. Battery power is too low. Replace with new 2xAAA

alkaline batteries.

The batteries used up very

fast.

Incorrect or old, used up,

battery

Replace with new 2xAAA

alkaline batteries.

The photos are blurry 1. The camera is not held

steadily

2. The lens of camera is

dirty.

1. Hold the camera steadily until

it beeps when taking video

photo.

2. Clean the lens with soft dry

cloth.

For EU only

AM-TDC9J4-AGB-CLV-1

Easypix V912 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Easypix V912

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info