Bedienungsanleitung Easywalker Sky (Seite 21 von 81) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

769305

Zoom out

Zoom in

Vorherige Seite

1/81

Nächste Seite

EN-19

Storage basket

The EasyWalker SKY is supplied with the seat and the storage basket already ﬁtted. To

remove the storage basket, open all Velcro fastenings and poppers on the front and rear

of the storage basket. To reattach the storage basket, put the tapes and Velcro through

the buckle around the frame and close the tapes and Velcro fastenings (image 18). The

storage basket is accessed easily using the two zip fastenings.

Assembling the EasyWalker carrycot

WARNING: Keep plastic covers away from babies and children to avoid suffocation.

WARNING: Do not add a mattress thicker than 50 mm in the carrycot.

WARNING: Check that the carrycot is properly attached to the supporting frame and that

it is securely ﬁxed before you use the EasyWalker SKY.

IMPORTANT: The EasyWalker carrycot is intended to be used for children from birth to the

age of 6 months or 9 kg.

IMPORTANT: Only use the EasyWalker carrycot or accessories approved for use by

EasyWalker on the EasyWalker SKY.

IMPORTANT: Ensure that the parking brake is engaged when you place your children in or

remove them from the EasyWalker SKY.

IMPORTANT: When assembling the EasyWalker carrycot a child should not be in the cot.

Contents of the box

The following items must be contained in the EasyWalker carrycot box.

1 carrycot with sun canopy and cover.

1 mattress with ﬂeece and cotton cover.

1 rain cover.

1 mosquito net.

1 sheet cover.

1 instruction leaﬂet.

For assembly, you also need the connection tube which you have received with the

EasyWalker SKY or QTRO.

If items are missing, immediately contact the shop where you purchased the pushchair.

TIP: Use the cardboard packaging as a mat whilst assembling the item.

TIP: If the instructions say left or right, this is always meant when looking from behind

the EasyWalker SKY push-bar.

TIP: All components are designed to ﬁt together so you do not need to use force. If

something is not working, read the instructions again and try once more. If something

still does not work then ask for help in the shop where you purchased the item or watch

the instruction video on www.easywalker.nl

The EasyWalker carrycot is simple to assemble. Before using for the ﬁrst time, take the

carrycot out of the box, take the cover off the carrycot and remove the accessories, the

mattress and the inside covers. Pull the fastener on the bar (nearest to the head-end) in

the direction of the head-end until it clicks, left and right, into the metal holder (image

19). Pull the fastener on the bar (nearest to the foot-end) in the direction of the foot-end

until it clicks, left and right, into the metal holder.

Attach the inside covers to the carrycot again with Velcro. Put the mattress back in the

carrycot (image 20). You can now choose whether you want the ﬂeece or cotton side

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Easywalker Sky Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Easywalker Sky

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info