Bedienungsanleitung Ebikemotion App (Seite 21 von 76) (Englisch)

780504

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

The ebikemotion® eBike pairing process is required to use

the APP when you are using an ebikemotion® compatible

eBike. Before stat prepare the following:

- One ebikemotion® compatible eBike with Bluetooth®

connectivity

- A reliable internet connection

- Your smartphone with the APP already installed

APP IS FREE but maps are “pay per use” inside APP. If you do

not have a FREE subscription to download maps (included

from factory with your compatible ebikemotion® eBike), you

will need to purchase one if you want to use the Map and

Navigation feature.

To facilitate pairing & installation, follow these steps:

1. Install the APP on your smartphone and complete the

Registration or Login process

2. Switch on the POWER button of the ebikemotion®

(Remote Control)

a) When the APP detects an unpaired

ebikemotion® compatible eBike, it will then pair and you will

note that the “pairing with ebikemotion® bike” message will

then disappear

b) If the ebikemotion® compatible eBike is not

paired, perhaps the bike is paired with another

Smartphone. In this case check your remote manual to see

the Bluetooth® reset process of your remote. (In the section

7.2 you have some information about this process)

When the ebikemotion® eBike is paired you will see a

GREEN ALERT in the top of the screen with the message

“bike pairing – pairing with the eBike done”. From that

moment your ebikemotion® compatible eBike and your

Smartphone will be paired and it will not be necessary to

pair again. The ebikemotion® compatible eBike will be

paired with your last paired smartphone and will not be

visible for other Smartphones.

Each time that you switch-off your ebikemotion® compatible

eBike, you will receive in the APP a top screen alert with the

message: “bike pairing – connection with the bike lost”.

The Remotes and HMI systems can be able to be paired

with ONE SMARTPHONE at the same time. Once the

eBike is paired with one Smartphone, it is necessary to

delete the previous Smartphone to pair a new one. In the

ebikemotion HMI systems the deleting process usually is

made by the ON/OFF button of the Display or Remote.

Take this process as reference but check your HMI / Remote

manual for further details

- Switch off the eBike and restart it by long pressing

(press and hold) the button [C] to delete any previous

smartphone paired.

- RGB light [2] will start to flash in BLUE. If the automatic

Bluetooth® pairing process failed, do the process described

in point 7.1 Force the BT Connection)

There is one way to try to force the Bluetooth® connection if

your APP was connected to other ebike. Please select in the

main menu SETTINGS and later in the BIKE options tab on

“Pair with a new EBM bike”, the actual Bluetooth®

connection will be refused and the system will try to find a

free eBike by Bluetooth®.

7.2 Paring with a new Smartphone

Page 21

7. eBike Pairing

7.1 Force the BT Connection

ON/OFF BUTTON

OF REMOTE

Force the Bluetooth® pairing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ebikemotion App Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info