Bedienungsanleitung Ebode IPV68 (Seite 67 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

611776

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

March 2013 IPV68

5.0 Appendix

5.1 Frequently Asked Questions

Note: For most problems you might encounter, please check Network connections first.

Check the working status revealed by the indicators on the network server, hub, exchange and network

card. If abnormal, check the network connections.

I have forgotten the administrator username and/or password.

To reset the administrator username and password, press and hold down the RESET BUTTON for 15

seconds. Release the power button and the username and password will be reset back to the factory

default administrator username and password.

Default administrator username: admin

Default administrator password: None, i.e., no password

Subnet doesn’t match, double click to change

If IP Camera Tool shows error information “Subnet doesn’t match, double click to change!” Please

choose Obtain IP from DHCP server. (Figure 2.2). If it still shows this error after obtaining IP from

DHCP server, please check local area connection of your computer, change subnet, gateway of the

camera. Keep them in the same subnet as your computer. (Figure 2.3).

IP Address configuration

Check whether IP address of the IP camera server shares the same subnet as your computer: Click My

Computer >Control Panel> Network & Dial-up Connections > LAN > Attributes >Internet

Protocols (TCP/IP), and check IP Address and Subnet Mask. Make sure they are in the same

subnet when configuring the camera’s IP address manually.

Can’t access IP camera via the Internet

Some typical reasons:

1. ActiveX controller is not installed correctly (see more details: Figure 2.9 - Figure 3.1).

2. The port that the camera is using is blocked by your Firewall or Anti-virus software. Please change

to another port number and try again. (Figure 3.2).

3. Port forwarding is not successful (for more details see Figure 7.4 - Figure 7.9).

Double check these settings and make sure they are correct.

IP Camera Tool could not find camera’s IP

Make sure the camera is connected to its power supply and the power supply is plugged in.

Check if the network cable is not loose.

Make sure DHCP is enabled in your router, don’t enable MAC address filter.

Make sure that firewall or anti-virus software does not block the camera. You can add the camera as a

trusted site in your firewall or anti-virus software.

UPnP always fails

UPnP only contains port forwarding in our recent software. Sometimes, it might fail to do port forwarding

automatically because of firewall or anti-virus software. It also relates to your router’s security settings.

So we recommend you do port forwarding manually. You can view your camera via the Internet

successfully after you do port forwarding manually in your router.

Couldn’t find the shortcut on desktop after install IP camera tool

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ebode IPV68 Seite 67

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info