Bedienungsanleitung Ebode IPV68 (Seite 68 von 76) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

611776

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

March 2013 IPV68

If you use Windows 7 or Vista, and you could not find the shortcut on desktop after installing the IP

camera tool, please check if the path of the tool port to is correct.

For example, was it was pointing to C:\Windows\System32\IPCamera.exe.

Please fix this by pointing the shortcut to the correct path C:\Windows\SysWOW64\IPCamera.exe. After

this you should be able to use the shortcut without any problems.

I can’t change the record path

When you use Windows 7 or Vista, you may be not able to change the record path due to the security

settings of your computer.

1. Please add the camera as a trusted site to solve this issue.

The step is: “IE browser→Tool→Internet Proper→Security→Trusted sites→Sites→Add”.

2. You can also run the IE as administrator; input the IP address of the camera manually.

I can’t find multi-device settings and record icon

Record and multi-device function are controlled by activeX controller.

So if you use Safari, Firefox, or Google chrome, it is not possible to use these functions.

Camera cannot connect wirelessly

If your camera could not connect wirelessly after you set wireless settings and unplug the Network cable:

Please check whether your settings are correct. (Details: Wireless LAN settings).

If the camera can’t connect wirelessly it is usually because of wrong settings.

Double check the SSID, Encryption share key, Channel, should be the same as your wireless router.

Share key should not contain special characters, only letters and numbers.

Don’t enable MAC address filter.

I can’t see other cameras in multi-device configuration by remote access

If you want to view all the cameras in your WAN. Make sure that each camera you add in multi-device

settings can be logged-in using DDNS name and port number. Use DDNS domain name to fill in the host

checkbox, not camera’s LAN IP. Double check your settings. (Details: Set Multi-Device for WAN).

I only see black screen or unusual code when remotely logged in

If you could access the login page in a remote place, it indicates that your DDNS settings are correct. But

if you could not see live video, but only some undefined characters, it may be internet speed problems,

especially if the camera works OK via Wi-Fi.

There’s no picture (Problems with ActiveX Controller)

If using IE browser to connect the camera for the first time, and there is no image displayed, you might

need to install ActiveX. You need to change some browser settings to enable ActiveX. (See: For IE

Browser).

Problems with network bandwidth

The image frame rate is subject to the following factors:

1. Network bandwidth.

2. PC performance, network environment and display preference setting (brightness, theme, etc).

3. The number of visitors (too many visitors will slow down the image frame rate).

4. Choice of switch or hub (use a switch for multiple IP Camera Servers rather than a HUB).

How to register an account from DDNS web

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ebode IPV68 Seite 68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info