Bedienungsanleitung Ebode IR Link Pro Flush (Seite 6 von 44) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

611763

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

7-4-2011 Rev2 6 IR Link Pro Flush

On the top of the cabinet there is a cut out for jumper placement. The default position of the

jumper is the parking position JP1. You have 3 different status led response positions:

- Default, JP on position JP1: Feedback LED active & Status LED not-active/unused

- JP on position JP2: Feedback LED & Status LED both always OFF

- JP cable on position JP2 with voltage supply within range: Feedback LED & Status LED active

(depending on external voltage being present)

- JP on position JP3: Feedback LED active & Status LED always ON (based on power to IRHUB4)

6. Operation

The IR repeater system should now operate each of the controlled components. When the

system is operating correctly, you should see a Blue "talk-back" LED flash on the front of the

IRLPRO Flush IR Receiver when you aim your hand held remote control(s) at it and press the

buttons.

7. How to avoid and solve possible problems

Although the ebode IR Link Pro Flush is equipped with proprietary eIR

(pronounced Irex)

Technology, which guarantees a high level of immunity of InfraRed noise from direct sunlight, CFL

lighting and Flat Panel TV’s (including Plasma, LCD and LED), in rare cases, the IRLPRO Flush IR

Receiver may have to be moved to a different location if the unit is picking up unexpected

interference. This interference may, in severe cases, prevent the system from working.

After repositioning, check to see if the IR Link Pro Flush operates the satellite Receiver or other

components. If the IR Link Pro Flush still does not work, reposition the IRED Emitter(s). It may not be

located directly over the component’s InfraRed receiving "window". Consult the owner's manual

of the unit or the manufacturer for the exact location of the InfraRed "window".

IMPORTANT: For installations involving more than two remote rooms, use the services of a

competent professional audio/video installer experienced in InfraRed remote control systems.

Do you still have questions? Please refer to www.ebodeelectronics.eu

8. Technical information

IRLPRO FLUSH IR RECEIVER SPECIFICATIONS

• InfraRed modulation frequency bandwidth: 30 - 60 kHz.

• Cable length 3m, extendable to max. 300 metres (UTP or equivalent).

• Red 3.5mm TRRS plug pin configuration from tip to sleeve:

o Tip = yellow = IR Data

o Ring 1 = black = Ground

o Ring 2 = red = +12VDC

o Sleeve = white = Status

• Reception range: Up to 10 meters, depending on local conditions and remote control used.

• Reception angle: 45 degrees off axis.

• Talkback LED (BLUE). Indicates InfraRed reception only when Emitter(s) are connected.

• Status LED (AMBER). Indicates power status of A/V system

• Maximum number of directly driven IRED IR Emitters: 4 triple Emitters using the IRHUB4

Connecting Hub. Up to six IRLPRO Flush IR Receivers may be connected in parallel at the

screw terminals input of IR Link IRHUB series connecting blocks (e.g. optional IRHUB2CI and

IRHUB4). Power requirements: 12 volts DC @ 25 mA. Requires 12VDC Power Supply (included).

• Dimensions IRLPRO Flush IR Receiver: 50 mm x Ø 16 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ebode IR Link Pro Flush Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info