Bedienungsanleitung Ebode VLHD38 (Seite 6 von 98) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

611741

Zoom out

Zoom in

Vorherige Seite

1/98

Nächste Seite

30-1-2015 6 ebode VLHD38

 Do not cover it or place other heavy objects on top of the unit which may block

thermal ventilation. Good air circulation around the product is required.

 For energy saving, please turn off the power switch or unplug the power adapter

when the units are not in use.

 If the product does not work properly, please restart it. If the problem maintains, cut

off the power and send it to professional technicians for repair or disposal. Please do

not open or repair it yourself.

 This product has been manufactured and tested to comply with each country’s safety

regulations. However, it doesn’t guarantee that interference would never happen in

some specific environment. If interference does occur, please take away the

interfering objects from transmitter and receiver.

 The optimal working distance between transmitter and receiver is 1 meter to 30

meters.

1.9 Cleaning

Unplug power adaptor before performing any cleaning. To clean the device, wipe with a

soft, dry cloth or with a cloth moistened with alcohol.

 Do not demount the device when connected to power outlet, otherwise, electricity

shock may happen.

 Maintenance should be conducted by an authorized technician.

 Dripping or splashing on the device is strictly prohibited.

 Keep the device away from fire or any source of heat.

 Don’t let kids play with this device.

2. Introduction

Forget pulling wires! Long Range Wireless HDMI has arrived. The ebode VLHD38 replaces

your current HDMI cable. The system, consisting of a transmitter and a receiver,

wirelessly streams uncompressed High-Definition videos from any HD video source

device to your HD TV (or projector), placed anywhere in your home. The operating range

is up to 200ft/60m line of sight. Includes USB Power cable which enables you to power

the receiver from a USB port* of your HDTV.

(* The USB port must have at least 1.5 amp. power output.)

3. Main Features

 Working on the 5.8GHz Frequency (high-speed band)

 HDMI Loop-Through

 Built-in Omni antenna

 With a transmission distance of 200ft/60m LOS with less than 100ms latency

 Power via USB or adapter

Please note: The VLHD38 cannot start-up a source device from standby over infrared if

the connection is not established. Connection can only be established once the source on

the remote location is powered to establish the HDMI handshake with the Transmitter.

You need to turn on the source (DVD, etc.) manually, which is linked to the VLHD38 to

get the infrared function to work. The main reason this slightly inconvenient handling is

required, is because there is a power-saving feature built in. Without this power-saving

feature the VLHD38 would 24/7 require a connection and therefore draws power and will

add additional cost to the home owner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ebode VLHD38 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info