Bedienungsanleitung Echostar dsb 880 2ci (Seite 7 von 38) (Englisch)

424404

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

EchoStar User Interface

Initial Installation

Section 1

S/W Version 1.0 Page 1 - 1

English

INIT IAL INST ALLATIO N

1. INTRODUCTION

The satellite receiver is pre-programmed with the FTA channels for ASTRA1 and HOTBIRD

as know during the manufacturing of the receiver. Note that it is possible to update the

channel lists easily, for a detailed instruction, please refer to installation update. The pre-

programmed channels are only for use in a single fixed dish installation with a so called

universal LNB. If your installation is different some extra programming needs to be done. For

a detailed instruction, please refer to the Guided setup.

2. NAVIGATION

The EchoStar User Interface has various ways to navigate through the menus and functions.

Some of the keys on the remote control unit give direct access to functions. Important keys

are identified as EPG, colored keys, MENU, OK and EXIT. Other keys are multi-functional

which means that their function can change with the selections you make.

3. TO INSTALL YOUR RECEIVER FOR THE FIRST TIME

This section assumes that the dish installation is completed and operational and your

receiver is connected to your TV and other equipment with suitable cables. Note that your

receiver is pre-programmed for a fixed dish installation with a universal LNBF. If you have

another dish installation (multiple LNBs or motorized), additional settings are required.

NOTE

Unless otherwise specified; this note explains the navigation through the menus and

functions.

In the main, user and EPG menu:

1. the MENU key lets you access to the main menu or go back one menu level;

2. the EXIT key lets you leave a menu or selection and return directly to live;

3. the keys let you scroll up and down through the selectable items;

4. the keys let you scroll left and right through the selectable items;

5. The OK key lets you:

- confirm and execute a selection;

- open a pull-down menu.

In a pull-down menu:

1. the OK key lets you confirm the selection;

2. the highlighted cursor indicates the active selection.

NOTE

For receivers that are connected with an UHF cable, make sure that the TV is set to

UHF channel 38 (607.25Mhz). If the channel number on the TV and receiver are not

the same, you will have a distorted or no image at all.

For more information, please refer to the user manual of the TV.

NOTE

For receivers that are connected with a SVHS cable, make sure that the audio to the

TV is connected with either the S/PDIF or the AUDIO L/R connector.

For more information, please refer to the user manual of the TV/VCR.

NOTE

From the next step onwards, the procedure is divided in different installation

procedures. The given procedures are; Fixed, Multiple LNBs, DiSEqC1.2 and GoTo X.

■ Fixed means install a single dish with an Universal LNB;

■ Multiple LNBs means install a dish with multiple LNBs or multiple dishes;

■ DiSEqC1.2 means install a moveable dish according the DiSEqC1.2 spec;

■ GoTo X means install a moveable dish that is GoTo X compatible.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Echostar dsb 880 2ci Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info