Bedienungsanleitung Echostar dsb 880 2ci (Seite 13 von 38) (Englisch)

424404

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

User Manual

Familiarization

Section 2

S/W Version 1.0 Page 2 - 3

English

2.1.2. MOTORIZED

ISEQC1.2

OTO X

2.1.3. SYSTEM SETUP

EARCH CHANNELS

NOTE

Some options might not be supported by your DiSEqC1.2 motor. Please refer to the

user guide of the motor for further details.

■ DiSEqC on To select the DiSEqC1.2 option for motorized installations.

■ DiSEqC off To select the DiSEqC1.0 option for fixed installations.

■ Limits on To select the dish movement limits option by software.

■ Limits off To delete the dish movement limits.

■ Move dish To move the dish and find the defined SAT.

■ Fine tune To move the dish for best signal level and quality.

■ Set East limit To set the East limit by software.

■ Set West limit To set the West limit by software.

■ Go to reference

If you want to reset your DiSEqC1.2 motor, you can re-calibrate

the position of the motor with the command: Go to reference.

Allow the motor some time to re-calibrate.

■ Recalculate position If a DiSEqC1.2 motor is out of position, you can recalculate the

position of all programmed satellites with the command:

Recalculate position. Allow the dish some time to recalculate

the SAT positions.

■ My latitude To set the latitude for the installation site of the dish.

■ North/South To select the hemisphere for the installation site of the dish.

■ My longitude To set the longitude for the installation site of the dish.

■ East/West To select the hemisphere for the installation site of the dish.

■ Set East limit To set the East limit by software.

■ Set West limit To set the West limit by software.

■ GoTo X To select the GoTo X option for DiSEqC1.2 installations.

■ SAT To define the satellite you want to search channels on.

■ LNB To select the LNB that you want to use for the selected SAT.

■ TP To select a transponder, from the internal database, of the

defined SAT. If the signal indicator shows low levels, select

another TP that gives a better signal.

■ Position

(DiSEqC1.2 only)

Shows the database number of the satellite.

■ Search mode To select Auto (all), TP or Network to search for channels.

■ Channel type To search for All channels, only FTA or only Scrambled

channels.

■ Channel To search for All channels, only TV, only Radio or only Data

channels.

■ Move dish

(DiSEqC1.2 only)

To move the dish and find the defined SAT.

■ Fine tune

(DiSEqC1.2 only)

To move the dish for best signal level and quality.

■ Search channels Search channels does a channel search on the defined SAT.

■ Signal level To indicate that you receive a signal (signal strength).

■ Signal quality To indicate that you have lock onto the selected TP (signal-to-

noise ratio).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Echostar dsb 880 2ci Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info