Bedienungsanleitung Echostar t 222 (Seite 14 von 22) (Englisch)

424407

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

Section 3 Description and Operation User Guide

Page 3 - 6 EchoStar International Corporation

6. THE MAIN MENU STRUCTURE

The main menu has a tree structure where each sub-menu has one or

more option pages. Each sub-menu allows you to customize the settings

to match your installation. Note that the menu contains dynamic pages

which means that options are, or are not available depending on the

selections you make.

The key gives access to the main menu, that gives you control over

the settings in the Installation menu, the User data menu and the

Information menu.

6.1. INSTALLATION

LANGUAGES

■

Menu To set the language you want to use in the

menus.

For multi-lingual EPG, if available, the

information is shown in the menu language. If a

selected language is not transmitted, the

information is shown in the native language of

that channel.

■ 1st Audio

■ 2nd Audio

To set the language for programs with multi-

lingual audio.

For multi-lingual programs, if available, you can

choose your own language. The receiver will first

look for the 1st selected language, if not

available, for the 2nd. If the two selected

languages are not transmitted, audio is given in

the native language of that channel.

■ 1st Subtitle To set the language for programs with multi-

lingual subtitles. For multi-lingual programs, if

available, you can choose your own language. If

the selected language is not transmitted, no

subtitle is shown.

NOTE

You can override the selection per channel with use of the alternative

audio and subtitle key on the RCU.

ANTENNA INSTALLATION

6.2. USER DATA

SYSTEM SETUP

CHANNELS

■

Mux To select the carrier (mux) you want to check for

the signal strength.

■ View To list the channels that belong to the selected

mux.

■ Search channels To do a search for all available channels as

available in the selected mux.

■ Signal level To indicate that you receive a signal (signal

strength).

■ Signal quality To indicate that you have lock onto the selected

mux (signal-to-noise ratio).

■ Search channels To do an automatic all channels search for all

available channels as received by the antenna.

■ Search mux To do a search for all available channels as

available in the selected mux.

The green key allows you to choose between

selection by mux number or frequency and

bandwidth.

■ Edit mux To edit an existing mux after a change as

indicated by a service provider. This option lets

you change the PID information and the

terrestrial transmission parameters.

Easiest option is to do an automatic channel

search.

■ Setup favorites To add or delete the highlighted channel from the

selected favorite list. Note that each color

represents a favorite list.

In this menu it is possible to change the favorite

name into something meaningful to you (i-key).

■ Edit channels To Delete, Move or Rename a channel. In this

menu it is possible to set a channel lock

(Parental control).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Echostar t 222 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info