Bedienungsanleitung Ecm Casa Speciale (Seite 9 von 22) (Deutsch, Englisch, Holländisch)

499466

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

ENGLISH

Instruction manual CASA SPECIALE 8

Emergency stop

In case of emergency, the grinder can be immediately stopped by operating the power switch.

5 First use

Place the grinder on an even, stable and dry surface.

Screw the tamper to the support. Then proceed as follows:

1. Fill the bean hopper with fresh coffee beans (max. 500 g)

2. Open the hopper slide.

3. Operate the power switch.

4. To find out the optimum grinding degree, only grind one portion of coffee first by filling only one

chamber of the dosing unit.

Important: Never fill already ground coffee in the bean hopper. Do not put your finger or any other object inside the

coffee bean entrance slot or coffee dispensing spout.

6 Changing the grinding degree

The grinding degree is preset. You can change the grinding degree to achieve an optimum grinding which fulfils your

needs. The grinding degree can be changed as follows:

 Switch on the grinder by operating the power switch to prevent the coffee beans from jamming between the

grinding blades.

 Please unlock the setting scale for the grinding degree by pushing down the locking pin on the left side of the

grinder.

 You can achieve a finer grinding by turning the bean hopper clockwise.

 You can achieve a coarser grinding degree by turning the bean hopper counter-clockwise. (Advice: The coffee

reacts differently on the effects of weather. Choose a fine grinding degree in dry weather and a coarse grinding

degree in humid weather.

 After setting the optimum grinding degree, switch on the grinder by operating the power switch. Switch it off

when the level of the ground coffee has increased to the height of the black dosing controller (approx. 1 min).

Advice: It is recommended to turn the bean hopper only step by step to gradually set the grinding degree.

7 Changing the dosing degree

The dosing quantity is preset to an optimum quantity of 6.5–7 g. You can change the dosing amount by turning the

dosing controller. Proceed as follows:

 Push the pin downwards.

 You can reduce the quantity by turning the dosing pin clockwise.

 You can increase the quantity by turning the dosing pin counter-clockwise.

 A full rotation of the pin reduces or increases the coffee amount by approx. 0.7 g.

8 Cleaning

A regular and accurate cleaning of the grinder avoids that the fats and oils in the coffee become rancid and

negatively affect the coffee aroma.

Clean the grinding blades and the windings very carefully. If there are coffee residues left in the winding, the grinder

cannot be adjusted properly.

Important: Always switch off the machine (power switch in position “0”) and disconnect the power cord before

cleaning the grinder.

1 Clean the empty bean hopper inside and outside with a damp cloth.

2 Dry the bean hopper with a soft, clean cloth.

3 Clean the grinder body with a damp and with a dry cloth.

4 Clean the doser on the inside with a cleaning brush

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ecm Casa Speciale Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info