Bedienungsanleitung Ecoforest Dublin II (Seite 26 von 108) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

742012

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

2.16. If the stove has special characteristics, like radiant floor heating or parts governed by thermostatic valves, a

buffer tank is needed to achieve the right regulation.

2.17. Depending on the material used for the hydraulic circuit, consider using an electrolytic sleeve.

2.18. It is highly advisable to perform regular checks to assess the quality of the water in the system, especially if

more water is being added. If you use a water treatment product, make sure it is compatible with the

materials used in the heating installation. To do so, please contact the product’s manufacturer.

2.19. In order to refill the stove with fuel, the user must open the hopper lid and empty the contents of the fuel

tank carefully, to prevent it from overflowing.

Drawing 1

3. FUEL QUALITY.

Your boiler is designed to operate with wood pellets; however, it can also work with other biomass fuels (ask

your dealer about this). Many types of pellets are sold on the market, with very different quality levels. For this

reason, it is very important to choose pellets free from dirt, with no excessive level of damp nor additives that

compact sawdust.

The boiler output may vary depending on the type of pellets you use.

ECOFOREST do not have any control on the quality of the pellets you use. For this reason, ECOFOREST cannot

guarantee the full output of your boiler nor the eventual premature aging or eventual damage of the gas outlet. It is

recommended to use ECOFOREST pellets which are approved as per European standard DIN 51731 and

distinguished by the logo of ECOFOREST printed on the 15kg bags.

If you use other biomass fuels, please note that the boiler’s operating parameters and, in most cases, the

combustion grate, are not the same as those used for wood pellets. Before burning any fuel other than wood pellets,

consult your dealer on whether the desired type of fuel can be used, as well as the requirements it should meet,

and/or the type of grate necessary.

4. INSTALLATION.

The below security distances and assembly diagrams are given for information only as an adaptation shall be

made depending on the norms in force regarding gas outlet, power, security minimum distances specific to

geographic areas.

The installation of the boilers must be done in the same way, for this reason, only the DUBLÍN model will be

exposed. In the same way, air inlets and water connections will be missed in all drawings as section 4.11 indicates

the minimum security distances to be respected for their installation.

UNPACKING THE BOILER.

4.1. Remove the packaging and the protective plastic.

4.2. Remove the screws or bolts that fasten the boiler to the pallet and remove it.

4.3. If our model has a plastic protection, it must be removed before starting it.

MATERIAL REQUIRED FOR INSALLATION.

4.4. Mandatory stainless steel pipe (AISI 316L), never use aluminum, galvanized or iron pipe.





Hopper lid.





Fuel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ecoforest Dublin II Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ecoforest Dublin II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info