Bedienungsanleitung Ecoforest Teide (Seite 36 von 152) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

742221

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

Drawing 11

SECURITY NORMS FOR GAS OUTPUT AND AIR INPUT.

4.17. Gas output must be located in a ventilated area, not in closed or half-closed areas e.g. garage, corridor, air

space of the house or places where gas may concentrate.

4.18. The external parts of the stove may reach high temperatures that might burn when touching; it is

recommended to use a non flammable grid to avoid risk of burn for children and old people.

The end of the gas outlet flex should remain higher than the stove’s output. It is mandatory to install at least

two metres in length vertically to create natural current preventing smoke, odors or eventual cut of electric

supply.

The horizontal pipe must not be longer than 1 metre; greater lengths mean ash, condensation or corrosion

may build up in this area.

Faced with cut of electric supplies and unusual weather conditions (storms, strong winds) it is

recommendable to install an uninterruptible power supply (UPS) which we have available as an option. This

apparatus only feeds the exhaust vent.

4.19. Distances from doors, windows, ventilation grids or air input to the house or building:

Drawing 12

4.20. The minimum distance from gas outlet to ground shall be minimum 65cm, depending however on the

surface. Gas may burn grass, plants, trees located near the gas outlet. In the event that the stove outlet is

lower, suitable safety measures should be taken. The outlet pipe should never be below the extractor itself.

4.21. The distance between gas outlet and public pavement shall be minimum 2.20 m. See your local regulations.

4.22. Never fix the gas outlet flex in a chimney or a flex already installed which diameter is 4 times as large as the

stove’s flex (Ø80 max. 200 cm

). When installing the stove in higher section the gas outlet must be channeled

to the top.

If the tube that was installed previously was used with another type of heating (wood, oil, etc.), you MUST

clean it thoroughly, to reduce the risk of fire in the gas vent.

4.23. Gas outlet flex cannot be installed in a share pipe such as the pipe of an extractor hood, another stove or

heating system.

4.24. If gas outlet installation is wrong, combustion air’s homogeneity might be bad which could make the wall of

the house or the building dirty, aggregate trash inside the stove and thus be the source of premature

degradation of the spare parts and gas outlet pipe.



Convection air outlet selector

Distance from ventilation grid.

500 mm

Distance from ventilation grid.

500 mm

Lateral side of a window.

1250 mm

Top of a window.

650 mm

Top of a door.

650 mm

Lateral side of a door.

1250 mm

Adjacent wall.

300 mm

Height from adjacent wall.

2300 mm

Adjacent building.

650 mm



Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ecoforest Teide Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Ecoforest Teide

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info