763669
8
Zoom out
Zoom in
Vorherige Seite
1/128
Nächste Seite
8
EN
mounttheange(7)usingtheangekey(8).
Mounting and removing the grinding disc

Do not use the machine without the
guard.
Mounting
● Placethemachineonatablewiththeguard
(4)facingupwards.
● Keepthespindlelockbutton(2)pressedand
removetheange(7)usingtheangekey(8).
● Mountthegrindingdisc(9).
● Keepthespindlelockbutton(2)pressedand
mounttheange(7)usingtheangekey(8).
Removing
● Placethemachineonatablewiththeguard
(4)facingupwards.
● Keepthespindlelockbutton(2)pressedand
removetheange(7)usingtheangekey(8).
● Removethegrindingdisc(9).
● Keepthespindlelockbutton(2)pressedand
mounttheange(7)usingtheangekey(8).
Mounting and removing the auxiliary grip

Mounting
● Tightentheauxiliarygrip(6)intooneofthe
mountingholes(13).
Removing
● Loosentheauxiliarygrip(6)fromthemounting
hole(13).
USE

● Thismachineinequippedwithasafety
switchand needs to be unlocked before
operation.
● Pressatthebottomoftheswitchtounlock
theon/offswitch.
● Slidetheon/offswitchforwards.
● Toswitchoff,depresstheon/offswitch,this
will then jump to the ‘off’ position.
● Donotputthemachinedownwhenthe
motorisstillrunning.Donotplacethemachine
onadustysurface.Dustparticlesmayenter
themechanism.
Hints for optimum use
● Clamptheworkpiece.Useaclampingdevice
for small workpieces.
● Drawalinetodenethedirectioninwhichto
guide the grinding disc.
● Holdthemachinewithbothhands.
● Switchonthemachine.
● Waituntilthemachinehasreachedfullspeed.
● Placethegrindingdiscontheworkpiece.
● Slowlymovethemachinealongthepre-drawn
line,rmlypressingthegrindingdiscagainst
the workpiece.
● Donotapplytoomuchpressureonthe
machine.Letthemachinedothework.
● Switchoffthemachineandwaitforthe
machine to come to a complete standstill
before putting the machine down.
CLEANING AND MAINTENANCE
Before cleaning and maintenance,
always switch off the machine and
remove the mains plug from the mains.
● Regularlycleanthehousingwithasoftcloth.
● Keeptheventilationslotsfreefromdustand
dirt.Ifnecessary,useasoft,moistclothto
remove dust and dirt from the ventilation slots.

Worn or damaged grinding discs must be
replaced immediately.
Only use sharp and undamaged grinding
discs.
● Toremovetheoldgrindingdisc(9),proceed
as described in the section
”Mountingandremovingthegrindingdisc”.
● Tomountthenewgrindingdisc(9),proceed
as described in the section
”Mountingandremovingthegrindingdisc”.
Carbon brushes
Ifthecarbonbrushesareworn,thecarbonbrushes
must be replaced by the customer service
department of the manufacturer or a similarly
qualiedperson.
WARRANTY
Consulttheenclosedwarrantyterms.
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Economy by Ferm AGM1045 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info