706115
2
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
Quick-start Guide
Terra Nova Amplifiers and Combos
Quick Start Guide - Guide de démarrage - Kurzanleitung - Manual De Usuario - Guida Rapida - クイックスタート・ガイド - 快速入门
Amplificateurs et combos basse Terra Nova - Terra Nova Bass Topteile und Combos - Amplificadores Y Combos De Bajo “Terra Nova
Amplificatori e Combo per Basso Terra Nova - ベースアンプヘッド&コンボ
4013.020
Quick Start Guide | Terra Nova Amplifiers & Combos
2
important safety information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with a cart, stand, tripod, bracket, or other unit
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
anyway, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
3
IMPORTANT SAFETY INFORMATION
Quick Start Guide | Terra Nova Amplifiers & Combos
WARNING - To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not
be exposed to dripping or splashing objects. Objects filled with liquids, such as beer glasses, shall not be placed on the apparatus.
WARNING - The mains plug / appliance coupler is used as a disconnect device, the disconnect device shall remain readily
operable.
WARNING - Protective earthing terminal. The apparatus should be connected to a mains socket outlet with a protective
earthing connection.
Avertissement: pour réduire le risque d’incendie ou choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
La prise du secteur est utilisé pour déconnecter le système.
La prise du secteur ne doit pas être obstruée ou doit etre facilement accessible pendant son utilisation pour être complètement
déconnecté de l’alimentation d’entrée la prise doit être débranchée du secteur.
4
Quick Start Guide | Terra Nova Amplifiers & Combos
ENGLISH:
5. Introduction 6. Before You Plug In 7. CAUTION! 8. Unit Diagram - Front Panel 10. Unit Diagram - Back Panel
12. Product Support
FRANCAIS:
13. Bienvenue chez EDEN 14. Avant de vous brancher 15. ATTENTION! 16. Diagramme - Face Avant
18. Diagramme – Face Arrière 20. Assistance produit
DEUTSCHE:
21. Einleitung 22. Vor dem Einschalten 23. WARNUNG! 24. Produktdarstellungen – Vorderseite
26. Produktdarstellungen - Rückseite 28. Produkt Support
ESPAÑOL:
29. Introducción 30. Antes De Conectar Su Equipo 31. ¡Atencion! 32. Controles Del Panel Frontal
34. Controles Del Panel Posterior 36. Soporte De Producto
ITALIANO:
37. Bienvenido a EDEN 38. Prima di collegare 39. ATTENZIONE! 40. Schema dell’Unità – Pannello Frontale
42. Schema dell’Unità – Pannello Posteriore 44. Assistenza Prodotti
日本語:
45. はじめに 46. 楽器を接続する前に 47. 使用上の注意 48. フロントパネル機能 50. リアパネル機能
52. 保証・お問い合わせなど
中文:
53. 介绍 54. 在你插上乐器之前 55. 警告! 56. 设备图示 - 前面板 58. 设备图示 - 背板
60. 产品支持
5
Introduction
Quick Start Guide | Terra Nova Amplifiers & Combos
For over 40 years EDEN has been designing and manufacturing bass equipment for the discerning bass player.
Our mission has always been to offer the best possible equipment with the most useable features while continuing to develop new
technology.
At EDEN we like to look at bass a little differently from everyone else, so instead of asking what is it about our amplifiers that
people love, we ask what could we do to make our amplifiers more fun, more intuitive and more flexible, but retain the famous
EDEN tone. Working alongside musicians, touring techs, and some very influential producers EDEN has sought to find out how
and why people use the equipment they use and combine all of the elements people really want in a professional product.
The TerraNova range from EDEN offers a new and exciting range of amplification, combining traditional tested tone creation with
new manufacturing technologies to provide an amplifier solution for every style of player. We hope you enjoy your new amplifier
as much as we have enjoyed designing it.
For best results, pair with your TerraNova amplifier with the TerraNova cabinet range to maximize your response and get the
optimal sound from your rig. Alternatively why not try one of our D-Series cabinets with adjustable tweeter control for exceptional
tone definition. TerraNova Combos boast all of the same features as TerraNova heads with the benefit of an integrated speaker
cabinet, tuned and ported for optimum output.
6
Quick Start Guide | Terra Nova Amplifiers & Combos
Before You Plug In
Before you plug in or use your amplifier please ensure you know how to correctly operate your unit. Incorrect operation or
installation may lead to undesirable results or unit failure which can be avoided by reading this guide.
Your amplifier or combo has been designed to ensure that it performs time and time again with consistent tone. In order to ensure
your amplifier provides years of service it is important that you protect the amplifier from overheating. In order to do this you
should follow a few simple rules that will help protect your investment.
1. Do not block Vents or disable Ventilation systems. Your amplifier has been designed with a ventilation system that allows air
to circulate over internal components inside the amplifier. in some cases (depending on the model) your amplifier may also
be fitted with a fan to provide additional cooling. Vent holes and fans are designed to ensure your amplifier can perform to its
maximum capacity for the longest time. Blocking and vent holes or disabling any fans that may be fitted will not only void your
warranty, but will almost certainly reduce the life of your amplifier.
2. Correct Loading: In order to get the most power and performance from your amplifier you should use a 4 Ohm load with
your amplifier. EDEN combos are pre loaded with 4 Ohm speaker solutions so you will get the maximum power right out of
the box. When choosing Speakers for EDEN TerraNova heads you should think about what impedance rig your will use. 2x
8 Ohm cabinets will provide a 4 Ohm rig, but if you are only using a single cabinet your are best to opt for a 4 Ohm single
cabinet.
Remember using a load below 4 Ohms will cause stress on the amplifier, so always make sure your minimum total load never drops
below 4 Ohms.
If you are unsure about any about rig impedances or anything else to do with your amplifier speak to the store where you bought it
from, they will be more than happy to provide you with advice.
7
Caution!
Quick Start Guide | Terra Nova Amplifiers & Combos
The equipment you have purchased has been developed to provide you with a tool to achieve great tone and in some cases deliver
levels of volume that may be unsuitable for use in confined spaces or without hearing protection.
Every piece of EDEN equipment is designed to perform exceptionally and just as with other high performance products can in
certain situations be capable of operating at levels that may be outside of the requirements or capability of the user.
Use this equipment safely and considerately, the volume control on higher Wattage amplifiers is your responsibility. Your ears and
those of others who are fortunate enough to hear you play are your most important instruments required to enjoy your music.
If you experience any hearing loss or discomfort when listening to any loud music or activity which involves excessive noise then for
your own sake speak with a medical professional. As a musician keeping your ears in good working order is as important as being
able to play your instrument, you only get one set of ears!
unit diagram - FRONT PANEL
8
Quick Start Guide | Terra Nova Amplifiers & Combos
These features are the same across all TerraNova amplifier and combos.
1. Active Input: Plug your active or high output bass in here.
2. Passive Input: Plug your passive or low output bass here.
3. Mute LED: When the amplifier is muted this light will illuminate.
4. Mute Switch: Press this switch to mute and unmute the amplifier.
5. Compressor Light: This LED will illuminate when the compressor
feature is switched on.
6. Compressor Switch: Use this switch to turn the built in compressor
circuit off and on.
7. Input Gain: Use this control to adjust the amount of signal sent into
the preamp stage. Use in conjunction with the Input Gain clip light
to avoid clipping the input stage of the amplifier.
8. Input Gain Clip Light: When illuminated this LED shows clipping
is occurring in the preamp. To prevent this either turn down the
output of your instrument, or dial the Input Gain to a lower setting.
9. Enhance: Use this control to adjust the amount of Enhance added
to your EQ setting. This EQ sweep allows quick and effective
adjustment of your EQ with a single dial. For best results use the
Enhance control with all other EQ settings at 12 O’clock before
detailing your tone.
10. Enhance Light: When illuminated this LED indicates the
Enhance feature in the amplifier is turned on.
11. Bass: Adjust the low frequencies of the amplifier using this
control.
12. Bass Boost Switch: Use this switch to turn on the Bass boost
feature on the amplifier. When engaged the Bass control will
provide more pronounced Bass adjustment.
13. Bass Boost Light: when illuminated this LED indicated the Bass
boost feature is turned on.
14. Low Mid Freq Sweep: Adjust the frequency affected by the Low
Mid control from 30 Hz up to 300 Hz using this control.
15. Low Mid Control: Change the amount of frequency adjustment
by the low mid freq sweep using this dial.
16. Hi Mid Level Control: Adjust the frequency affected by the
upper mid freq sweep using this control.
9
unit diagram - Front panel (continued)
Quick Start Guide | Terra Nova Amplifiers & Combos
17. Hi Mid Freq Sweep: Adjust the frequency affected by the Hi Mid
control from 200 Hz up to 2000 Hz using this control.
18. Treble: adjust the highest frequencies on the amplifier using this
control
19. EQ clip light: When illuminated this LED indicates the EQ stage of
the amplifier is casing the amp to clip. To avoid clipping adjust the
frequency controls until the light remains off.
20. Master: Use this Control to adjust the overall output volume of
the amplifier.
21. Master Clip light: This LED will illuminate if anything causes
the power amp to clip. if the power amp is clipping adjust your
settings to prevent the light coming on.
22. Logo: Eden illuminated logo: this logo will illuminate when the
amplifier is switched on.
ACTIVE
PASSIVE
CLIP
MASTER
CLIP
EQ CLIP
ENHANCE
COMP
MUTE
HI MID
-15 +15
LOW MID
-15 +15
BASS
-15 +15
TREBLE
-15 +15
165
30 300
1.1K
200 2K
BOOST
INPUT
GAIN
11 15 16
14 17 18
20
2210
9
13
12
19
21
843
5 6
1
2
7 9
10
Quick Start Guide | Terra Nova Amplifiers & Combos
unit diagram - back panel
The overall layout on the rear of TerraNova head and combo units may vary, but the overall feature set remains the same.
Just remember that if you intend on using alternative cabinets with your combo amplifier you should first unplug the cable that connects the
internal 4 Ohm speaker, and always ensure the correct load is used with the amplifier.
1. Power Inlet: Plug your supplied power cord into your Eden amplifier using this mains inlet socket. Always ensure the power you are using is
the correct voltage as shown on the amplifier itself.
2. Power Switch: Turn the amplifier off and on using this switch.
Speaker Outputs: your amplifier or combo is fitted with 3 speaker output sockets. 2 of the sockets are 1/4” Jack sized and 1 is a Clear
Speakon type socket. Use either the single speakon (with a 4 Ohm cabinet for full power) or up to 2 sockets in combination. NEVER use all 3
sockets at the same time and always ensure your minimum total load for the entire rig is no less than 4 ohms. Your amplifier is also designed
to operate with no load, for either playing using headphones, using the amplifier in a studio, or as a preamplifier in a performance.
3. Speaker 1 out: Connect your unit to a speaker cabinet via a 1/4” Jack cable to this socket.
4. Speaker 2 out: Connect your unit to a speaker cabinet via a 1/4” Jack cable to this socket.
5. Speaker 3 out: Connect your unit to a speaker cabinet via a Speakon cable to this socket.
6. Headphone Out: Connect your headphones here using standard 3.5mm headphone cable.
7. MP3 / Line in: connect and external device using a 3.5mm jack cable here.
8. DI Ground Lift: Lift ground from your signal (when required) using this switch.
9. DI Pad: Pad the signal (reduce the output level) between line level and mic level using this switch.
11
unit diagram - back panel (continued)
Quick Start Guide | Terra Nova Amplifiers & Combos
POWER
ON
OFF
220V ~ 240V100V ~ 120V
250 WATTS MAXIMUM
PHONES
AUX
IN
SPEAKER OUTPUTS
225 WATTS 4Ω MIN.
SEND
RETURN
TUNER
OUT
FOOT
SWITCH
DI OUT
PRE/
POST
DI OUT
LEVEL
GND
LIFT
Designed and engineered by
Eden Electronics.
Assembled in China under
stringent quality standards.
10. DI Pre / Post Select: Chose to take the DI signal from either before or after the preamp shaping circuit inside the amplifier.
11. DI Output: Connect to either a mixing desk, front of house system or recording device using a standard XLR cable.
12. Loop Send: Take your signal to your external effect loop or outboard equipment from here.
13. Loop Return: Return your signal from any outboard equipment or effect loop here.
14. Tuner Out: Take your tuner signal out from this socket.
15. Foot Controller: Connect your foot controller here.
1
2
3
4
5
6
7
8 9 10
11
13
12
14
15
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eden TN2252 Terra Nova wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info