672468
24
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
24
ENGLISH
USER INSTRUCTIONS
USER CONTROLS (REMOTE CONTROL)
- ON/OFF
- Switch-on/switch-off
- Manual mode setting
Power setting
Fan setting
- Automatic mode setting
Temperature setpoint setting
Fan setting
- RELAX function
- From the Menu page:
Load Pellets (SCREW LOAD)
Stand By
Crono-Program
Night
Date / time
Display
Language
Beep (BUZZER)
Info (technician only)
Technical menu (technician only)
We describe the procedures below.
ON/OFF
hold the ON/OFF button down to turn the product ON.
When ON, the product has a flame (ignition phase,
etc.) when there is a heating demand.
Switch-on/Switch-off
The ON/OFF button switches the product on (starts
the ignition phase) or off (starts the switch off phase)
manually in Manual mode only.
In Automatic mode, the product responds to the
heating demand.
Setting Manual/Automatic
Press the OK button for 2 seconds to switch from
manual to automatic or vice versa.
In Manual mode, the display reads “Man”
In Automatic mode, the temperature displays.
In automatic- Room Temperature Setting
Set Room Temperature (read by the remote control,
this should be be positioned in the room the product
is installed in)
Set the temperature setpoint (Set) with the “+” and “-“
buttons.
In manual- Power setting
Set the power level (displayed by the flame symbol)
with the “+” and “-“ buttons.
The power level displays next to the flame symbol.
Ventilation
The product is equipped with two fans, defined in the
control logic as fan 1 and 2, and displayed as positions
1 and 2 (see below).
The two fans can be adjusted separately. First adjust
fan 1 and then fan 2, as described below.
Ventilation setting
Follow the instructions below to manually regulate the
power levels of fans 1, 2 .
Press “OK” once
The fan setting displays, next to the blade symbol
representing the fan.
Set the fan level with the “+” and “-“ buttons.
The blades fill in to indicate the current setting.
Confirm by pressing the “OK” button for 2 seconds.
Fan setting 1 can also follow the room temperature
demand (reduce when the temperature is close to the
desired temperature or increase vice versa).
To activate this mode, press the + button to above the
maximum fan setting. The letter “A” will appear next to
the blade symbol.
Fan settings 2 can be increased or decreased using
the +/- buttons as described above or follow the power
demand (decrease when the power is decreased or
increase vice versa).
To activate this mode, press the + button to above the
maximum setting. The letter “A” will appear next to the
blade symbol.
THE NUMBER NEXT TO THE FAN BLADE OR FLAME
ONLY DISPLAYS WHILE THE SETTING IS BEING
MADE.
position 1
“flame”
symbol
“blade”
symbol
USER
24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Edilkamin ARIS UP PLUS wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Edilkamin ARIS UP PLUS

Edilkamin ARIS UP PLUS Bedienungsanleitung - Deutsch - 36 seiten

Edilkamin ARIS UP PLUS Bedienungsanleitung und Installationsanweisung - Holländisch - 36 seiten

Edilkamin ARIS UP PLUS Bedienungsanleitung - Französisch, Italienisch - 72 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info