Bedienungsanleitung Edilkamin ATLANTA UP (Seite 23 von 36) (Englisch)

810884

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

USER CONTROLS

(FROM DISPLAY / REMOTE CONTROL)

• Switch-on/switch-off

• Choose operating and regulation mode

• Clock regulation

• Timer setting

• Handling pellet reserve function

Switch-on/switch-off

Pressing the 0/1 button on the panel or emote

control allows you to manually turn the product on or

off.

During ignition, the message “Avvio” is displayed and

a countdown in seconds begins (1020).Ignition does

not have a preset time: it is automatically shortened if

the logic board detects the positive outcome of several

tests.After about 5 minutes, the flame appears.

In special cases where the product is below

3°C, it can be turned on using firelighters.

Do so only after consulting the technician.

Insert a lit firelighter cube into the grate,

close the door and press 0/1 on the

synoptic control panel or by remote

control

We describe the procedures below.

During power off , “OFF” is displayed (for 10 minutes).

Power off includes:

- Pellet drop is suspended

- Water circulator is active.

Never remove the plug as it is shutting down.

NB: unless otherwise regulated by the technician, the

circulator runs until the product has cooled down.

Choose operating and regulation mode

Automatic

The boiler operates with the aim of reaching the desired

water delivery temperature (read by its internal sensor)

set on the synoptic/by remote control (e.g. SET 60°C).

In this mode, the boiler will start at maximum power

then modulates a it approaches the SET temperature

and works at P1, without switching off once it has

reached its target.

In this mode, the boiler will switch on and off when the

0/1 button is pressed or at scheduled times set on the

panel/ by remote control.

The technician can enable a function (Economy) which

the boiler switches off and on again so that it reaches

the target water temperature

In this operating mode, the display shows the set water

temperature (e.g. Set 70°C), the delivery temperature

(e.g. Tm 65°C), the kg and the remaining time

(e.g. 50 kg 10h) and the current time (e.g. 15.33).

Press the +/- button to increase or decrease the

desired temperature.

Press button “A” button on the remote control to switch

to “Clima_Comfort” mode.

Clima_Comfort

The boiler operates with the aim of reaching the desired

room temperature read by

remote control and set on the panel/remote control

(e.g. SET 20°C).

In “Clima_Comfort” mode, the desired temperature

can be set by pressing the +/- buttons.

The temperature is transmitted via the

supplied remote control, which should be

within range of the radio field.

If the connection with the remote control is

lost, the product will continue operating in

power P1.

USER INSTRUCTIONS

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin ATLANTA UP Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Edilkamin ATLANTA UP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info