Bedienungsanleitung Edilkamin Demy (Seite 5 von 28) (Englisch)

810764

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

- 5 -

ENGLISH

E-BRUSHER

System for cleaning residue in the crucible from pellet combu-

stion.

This is a completely innovative system patented by Edilkamin

that exploits the dual action of the pellet feed screw.

GENERAL INFORMATION

g. 1

PRINCIPLE OF OPERATION

The dual-combustion stove produces hot air using either wood

pellets or logs for fuel, at the choice of the user.

Hereunder is the explanation of its functions (the letters refer to

gure 1).

When using pellets, the fuel is taken from the hopper (A) and,

by means of a screw (B) driven by a gear motor (C), is carried

to a second screw (B1) driven by a second gear motor (C1) and

then into the burner (D).

The pellets are ignited by the air that is heated by an electrical

resistance (E) and drawn into the combustion chamber by a

smoke extractor.

The smoke produced by combustion are extracted from the

combustion chamber by the same extractor fan and expelled

from the vent which can be connected to the back or on the top

of the stove.

When using wood, draught is natural.

If the door is opened during operation, a by-pass valve con-

nects the combustion chamber directly to the ue to avoid

fumes coming out of it.

Lighting can be performed in the following manner:

- MANUAL LIGHTING = lighting the wood with a relighter

and closing the door

- AUTOMATIC LIGHTING = using the remote control and

pressing key “A” for 2 seconds starts the pellet lighting-phase,

which allows wood burning.

Furthermore, if the wood in the combustion chamber runs out,

the stove will pass automatically to pellet mode, if desired by

the customer.

The stove has an LED positioned on top of the stove that indi-

cates its operating mode:

- LED OFF: no power

- GREEN LED: functioning with wood

- RED LED: functioning with pellets

- FLASHING RED LED: pellet-phase block

- FLASHING GREEN/GREEN/GREEN/RED LED: “AU-

TOMATIC” function active, DEMY will relight with pellets

when the wood in the combustion chamber is nished.

- FLASHING ORANGE LED: “LIGHT WOOD” function

activated.

- GREEN/ORANGE/RED/ORANGE/GREEN LED: burner

cleaning in progress.

The combustion chamber (made of refractory material) is

closed at the front by a ceramic glass door.

The stove is equipped with the innovative E-Brusher system,

which automatically cleans the crucible before each use of pel-

lets in order to ensure lighting even after the use of wood.

Fuel quantity, smoke extraction and combustion air supply

are all controlled by an electronic control board, which is

equipped with Leonardo software to achieve high combustion

efciency and low emissions.

All phases of operation can be managed via radio remote

control.

The stove is equipped with a serial port to connect an optional

cable (code 640560) to be connected to devices that allow

remote ignition (e.g. remote telephone, local thermostat, ect.)

* patented

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Demy Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Edilkamin Demy

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info