Bedienungsanleitung Edilkamin Fata (Seite 26 von 209) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

810768

Zoom out

Zoom in

Vorherige Seite

1/209

Nächste Seite

- 26 -

ENGLISH

PRINCIPLE OF OPERATION

The stoves heat the air using wood pellets as fuel, with electro-

nically controlled combustion. Hereunder is the explanation of

its functions (the letters refer to ﬁ gure 1).

The fuel (pellets) is transferred from the storage hopper (A)

to the combustion chamber (D) by means of a feed screw (B),

which is driven by a gear motor (C).

The pellets are ignited by the air that is heated by an electrical

resistance (E) and drawn into the combustion chamber by a

smoke extractor (F).

The fumes produced during the combustion process are

extracted from the hearth by the same centrifugal fan (F) and

expelled through the outlet (G) located on the lower part at the

back of the stove.

The stoves allow for hot air channelling to to convey the

air to heat adjacent rooms.

Two male pipes of a Ø 10 cm for hot air channelling connec-

tion are found on the back part.

To channel the hot air in one or two adjoining rooms, the stove

is equipped with two pipes on the back, to which special alumi-

nium pipes must be connected.

KIT 11 and KIT 11 BIS optional are available to facilitate air

distribution (see page 34-35-36).

Fuel quantity, smoke extraction and combustion air supply

are all controlled by an electronic control board, which is

equipped with Leonardo® software to achieve high combustion

efﬁ ciency and low emissions.

The synoptic panel (M) is installed on the top, through

which all phases of operation can be displayed and controlled.

The main functions can also be controlled by remote control.

A serial port is found at the back of the stove (optional

cable: code 640560) to be connected to devices that allow

remote ignition (e.g. remote telephone, local thermostat).

The stoves have an internal structure that is made entirely

of cast iron.

ﬁ g. 1

SAFETY INFORMATION

The stove is designed to heat, through automatic pellet com-

bustion in the hearth, the room where it is installed, both by

radiation and the air that comes out of the front grille.

• The appliance is not designed to be used by people, including

children, with reduced physical, sensorial or mental abilities.

Children must be supervised to ensure they do not play with

the appliance.

• The only risks that may derive from using the stove pertain

to non-compliance with installation instructions, direct contact

with live electrical parts (internal), contact with the ﬁ re or hot

parts (glass, pipes, hot air output), when extraneous substances

or non-recommended fuel are introduced, or due to incorrect

maintenance.

• Only use certiﬁ ed, high quality, 6mm diameter wooden pellets

for fuel.

• Should components fail, the stoves are equipped with safety

devices that guarantee automatic shutdown. These are activated

without any intervention required.

• In order to function correctly, the stove must be installed in

accordance with the instructions given herein and the door

must not be opened during operation: combustion is fully

automatic and requires no intervention.

• Under no circumstances should any foreign substances be

entered into the hearth or hopper.

• Do not use ﬂ ammable products to clean the smoke channel

(the ﬂ ue section connecting the stove smoke outlet to the

chimney ﬂ ue).

• The hearth and hopper parts must only be cleaned when

COLD.

• The glass can be cleaned when COLD with a suitable product

(e.g. GlassKamin Edilkamin) and a cloth.

• Do not clean when hot.

• Make sure the stove is installed and ignited the ﬁ rst time

by Edilkamin-qualiﬁ ed CAT personnel (technical assistan-

ce centre) in accordance with the instructions provided here

within; this is an essential requirement for the validation of the

guarantee.

• When the stove is in operation, the exhaust pipes and door

become very hot (do not touch without wearing the thermal

glove).

• Do not place anything, which is not heat resistant near the

stove.

• NEVER use liquid fuel to ignite the stove or rekindle the embers.

• Do not obstruct the ventilation apertures in the room where

the stove is installed, nor the air inlets of the stove itself.

• Do not wet the stove and do not go near electrical parts

with wet hands.

• Do not use reducers on the smoke exhaust pipes.

• The stove must be installed in a room that is suitable for

ﬁ re prevention and equipped with all that is required (power

and air supply and outlets) for the stove to function correctly

and safely.

• Should ignition fail, DO NOT re-ignite until you have

emptied the combustion chamber.

•ATTENTION: THE PELLET EMPTIED FROM THE

COMBUSTION CHAMBER MUST NOT BE DEPOSI-

TED INSIDE THE HOPPER.TED INSIDE THE HOPPER.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Fata Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info