Bedienungsanleitung Edilkamin Fata (Seite 37 von 209) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

810768

Zoom out

Zoom in

Vorherige Seite

1/209

Nächste Seite

- 37 -

ENGLISH

INSTRUCTIONS FOR USE

Commissioning must be done by a Technical Service Centre

authorised by Edilkamin (CAT) prior to ignition and testing

according to the UNI 10683 standard.

This standard indicates the control operations to be carried out

in situ, aimed at ascertaining correct system function.

Before igniting.

To ignite for the ﬁ rst time, it is essential to contact your local

Edilkamin technical service centre (CAT), (for information

see the www.edilkamin.com website) to calibrate the stove

according to the type of pellets used and installation conditions,

thereby starting the guarantee.

Failure to have the stove ignited by an authorised C.A.T. pre-

vents Edilkamin from guaranteeing correct functioning.

There may be a slight smell of paint the ﬁ rst few times it is

ignited, however, this will disappear quickly.

Before igniting you must check:

• that installation is correct

• the power supply

• that the door closes properly to a perfect seal

• that the combustion chamber is clean

• that the display is on standby (the date, power or temperature

ﬂ ashes).

FILLING THE PELLET HOPPER

The hopper lid opens and closes with a practical click-clack

system. Simply apply slight pressure to the front part of the

cast iron lid (ﬁ g. 1).

ATTENTION:

use the glove supplied when ﬁ lling the stove whilst it is run-

ning and therefore is hot.

ﬁ g. 1

If pellets with different characteristics are used, the stoves

must be recalibrated a similar procedure to that carried out by

the DEALER when the stove is ignited the ﬁ rst time.

Using unsuitable pellets may: decrease efﬁ ciency; cause

malfunctions; stop the stove from functioning due to clogging,

dirt on the glass, unburnt fuel, etc.

A simple, visual analysis of the pellets may be carried out:

Good quality: smooth, uniform length, not very dusty.

Poor quality: with longitudinal and transverse cracks, very

dusty, various lengths and mixed with foreign matter.

NOTE regarding the fuel.

The stoves is designed and programmed to burn wood pellets

with 6 mm diameter.

Pellets are a type of fuel in the form of little cylinders, made

from compacted sawdust, compressed under high pressure

with no adhesives or foreign materials.

They are sold in bags of 15 kg.

For the stove to function properly, you MUST NOT burn

anything else in it. Using other materials (including wood)

will render the warranty null and void. Such use is detected by

laboratory analyses. Edilkamin has designed, tested and pro-

grammed their stoves to guarantee the best performance when

pellets with the following characteristics are used:

diameter: 6 millimetres

maximum length: 40 mm

maximum moisture content: 8%

caloriﬁ c value: at least 4300 kcal/kg.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Fata Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info