Bedienungsanleitung Edilkamin Kira H - EKleaner (Seite 15 von 52) (Englisch)

810912

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

ENGLISH

OPTIONAL HYDRAULIC KIT

All kits are supplied with instructions for their connection to the boiler stove

Edilkamin technicians have a paper template suitable for each product. Make sure the correct one is used for the

product being installed.

Position the template so as to be flush with the floor and aligned with the left side of the maximum space occupied

by the boiler stove.

Be sure to respect the correct installation clearances away from flammable materials and for maintenance operations.

WATER CIRCUIT INSTALLATION

HEATING AND INSTANT DOMESTIC HOT WATER

The combinable Kits are:

• Pipe kit

• Kit R

• Kit RW

• Kit R2

The demand for heating can be made:

by the room temperature probe (if the read temperature falls 1°C below the set temperature);

by the flow switch, following the opening of the hot water tap.

The demand for heating is represented by a radiator or by a tap on the display.

HEATING AND BOILER FOR DOMESTIC HOT WATER

The Kits combinable with the boiler are:

• Pipe kit

• Kit R

The demand for heating can be made:

by the room temperature probe (if the read temperature falls 1°C below the set temperature);

by the boiler thermostat/probe demanding domestic hot water.

If there is a request for domestic hot water, the pump of the boiler stove turns on if the temperature of the boiler

stove is 5°C above the temperature of the boiler; if this happens the three-way valve deviates to the domestic water

supply. The distribution pump is off.

COMBINATION WITH ACCUMULATOR TANK

The Kits combinable with the accumulator are:

• Pipe kit

• Kit R

The accumulation probe must be set as accumulator tank probe

The demand for heating can be made:

by the thermostat/probe of the accumulator tank.

The pump of the boiler stove ensures the heat transfer from the boiler stove to the accumulator tank.

The (secondary) booster pump provides heat transfer from the accumulator tank to the system.

The timer programming on the display applies to the (secondary) booster pump.

These pages only include indications of possible installations and uses which must be

defined together with the installer and the Technical Assistance Centre during first ignition.

INSTALLER

EXAMPLES OF HYDRAULIC INSTALLATION

N.B.: These diagrams are for guidance only, the correct execution is the responsibility of the

plumber and the parameters must be set by the Technical Assistance Centre during first

ignition (commissioning).

HEATING ONLY

The combinable Kits are:

• Pipe kit

• Kit R

• Kit R2

The demand for heating can be made:

by the room temperature probe (if the read temperature falls 1°C below the set temperature).

The demand for heating is represented by a radiator on the display.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Kira H - EKleaner Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Edilkamin Kira H - EKleaner

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info