Bedienungsanleitung Edilkamin Pellkamin 10 (Seite 18 von 32) (Englisch)

810729

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- 46 -

ENGLISH

INSTALLATION

g. 23

g. 24 Y

NOTES ON FITTING THE COVERING

In using a prefabricated Edilkamin covering, to identify the

exact position of PELLKAMIN is important to verify the mo-

del of the covering to be used.

Positioning differs according to the model chosen (see as-

sembly instructions given in the packaging of each covering).

Always check that installation is perfectly vertical and horizon-

tal.

COVERINGS, COUNTER-HOODS AND THEIR

VENTILATION

Before installing the covering, check that all connections, com-

mands and moving parts are perfectly functional.

Check this with the insert on and working for a few hours. Do

so prior to tting the covering in order to intervene as necessa-

ry.

Finishing works, such as construction of the counter-hood,

covering assembly, pilaster preparation, painting, etc.,

should be carried out once the nal test has been passed.

Edilkamin will therefore not be held liable for any charges

deriving from both demolition and reconstruction works,

even where consequent to replacement of any faulty insert

parts.

Rather, at least 1 cm. (approx.) space must be left to allow

air to ow, thereby preventing heat from accumulating.

The counter-hood can be created from reproof plaster-

board panels or plaster sheets. When creating this, the air

circulation grill must be included, as previously specied.

- THE MANTEL CAN BE CONSTRUCTED WITH FIRE

RESISTANT PANELS IN PLASTERBOARD OR

GYPSUM BOARD.

- AERATION GRILLES FOR PREVENTING ANY

EXCESS TEMPERATURE INSIDE MUST BE PROVI-

DED FOR DURING CONSTRUCTION (g. 23).

During the construction phase of the covering it is funda-

mental to ensure that the combustion air is restored

to prevent pressure phenomena in the room where the

replace is installed (refer to the Chapter regarding the

external air inlet on page 40)

In addition to the above, always consider the indications

given by paragraphs 4.4 and 4.7 of standard UNI 10683

“insulation, nishes, coverings and safety recommenda-

tions”.

N.B.: IMPORTANT FOR INSTALLATION CONDITIONS

* Provide two aeration grilles (area larger than 100 cm2), the

rst one under the insert and the second positioned at least 50

cm above the insert or anyway communicating with the internal

compartment where the insert is positioned.

These grilles prevent the accumulation of heat inside, which is

then used to help heat the room of installation.

* Internal mantel

ventilation grilled

External

intake * Recycled air

intake inspection

METAL PROFILE FINISHING PLATE (X) FOR

MOUNTING OF “FRAME” COVERINGS

(supplied)

After removing the lower grille, you can mount, on the lower

base of the structure, the “angular” metal nishing prole (X

– for “frame” coverings or plasterboard) in place of the metal

prole plate (Y) previously mounted (see Fig. 24).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Pellkamin 10 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Edilkamin Pellkamin 10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info