Bedienungsanleitung Edilkamin Sally (Seite 38 von 178) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch)

810835

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

- 38 -

ENGLISH

INSTRUCTIONS FOR USE

REMOTE CONTROL

This controls all the functions.

- icon ashing: remote control searching for network

- icon xed: remote control with connection enabled

at battery (3 mini alkaline batteries type AAA)

keypad locked (press “A” and “M” in parallel for a few seconds

to lock or unlock the keypad)

programming enabled

alphanumeric display consisting of 16 gures arranged in two

lines of 8 gures

- icon ashing: stove turning on

- icon xed: stove working

manual adjustment function (display shows working power)

automatic function (display shows temperature)

Key to buttons and display:

: to turn off and on (to go from “remote control on standby” to “remote control on”)

+/- : to increase/decrease the various regulations

A : to select Automatic function

M : to select Manual function and access the control and programming menus

The display also shows other useful information in addition to

the icons described above.

- Stand-by position:

shows room temperature (20°C), kg of pellets (15 kg) remai-

ning in tank and current time (15:33)

- Manual work phase:

shows power set (Power 1), room temperature (20°C), kg of

pellets and autonomy remaining (15 kg 21 hrs)

- Automatic work phase:

shows temperature set (Set 22°C), room temperature (20°C),

kg of pellets and autonomy remaining (15 kg 21 hrs).

DO NOT PRESS THE BUTTON MORE THAN ONCE

Note: If the radio control is not used for a few seconds, the

display will go dark as it has moved into the power-saving fun-

ction. The display can be reactivated by pressing any button.

ONLY FOR SALLY PLUS

Push quickly “m” to enter into the MENU for the FAN SET-

TINGS. Inside the menu FAN SETTINGS, pushing “+” it

shows as follow :

- FRONT FAN

- FAN CANALIZ.

- SET CANALIZ.

• Inside the menu “FRONT FAN” it’s possible to choose ON or

OFF by “M”. To quit push .

• Inside the menu “FAN CANALIZ” it’s possible to choose ON

or OFF by “M”, if “FRONT FAN” is ON it shows on the di-

splay the percentage of ducting (ex. 50%), it’s possible to adjust

it from 30% to 90%, if “FRONT FAN” is OFF, it’s not possible

to adjust the percentage of ducting. To quit push .

• Inside the menu “SET CANALIZ.” Pushing “M” it shows

SET CAN. MAN. – SET NOT ACTIVE – EXT NOT ACTIVE,

to quit push .

Activate the automatic ducting sown as “CANALIZ.SET 20°”,

it’s possible by an option probe (cod. 100290) and it must be

activated only by EDILKAMIN technical service.

To activate the handling of ducting by remote control (ex room

chrono-thermostat) shown as “EXTERNAL SET” it needs a

connection option cable (cod. 640560) and it must be activated

only by EDILKAMIN technical service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Sally Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info