36
ENGLISH
Pellet stoves are equipped with the LEONARDO
®
SYSTEM.
LEONARDO
®
is a combustion safety and control system which allows optimal performance in all
conditions.
LEONARDO
®
ensures excellent operation thanks to two sensors measuring the pressure level in the combustion cham-
ber and smoke temperature. The detection of and subsequent optimisation of these two parameters is continuous in order
to correct operation anomalies in real time.
The LEONARDO
®
system offers constant combustion, automatically regulating the draft based on the characteristics
of the chimney flue (bends, length, shape, diameter, etc..) and environmental conditions (wind, humidity, atmospheric
pressure, installations at high altitude, etc.). The standards for installation must be respected.
LEONARDO
®
system is also able to recognise the type of pellets and automatically adjust the flow moment by moment
to ensure the required level of combustion.
FEATURES
SERIAL PORT
The Dealer can install an optional on the AUX outlet for control-
ling the process of switching on and off (e.g. telephone remote,
local thermostat), located at the rear oh the stove. Can be connec-
ted via special optional trestle (code 621240).
BACKUP BATTERY
A backup battery is found on the control board (3-Volt CR 2032
battery). Its malfunction is indicated with the following messages
(not considered a defect but due to normal wear-and-tear):
“Battery check”.
For more detailed information, please contact the DEALER who
has performed the first 1st ignition.
CONSOLLE cod. 297240
Service
AUX
230 Vac POWER
SUPPLY
50Hz +/-10%
TM 150°C
Vacuum gauge
Reading points
ELECTRONIC CIRCUIT BOARD
FLOW SENSOR
THERMOCOUPLE
T° fumi
SMOKE RPM
Panel control
INGNITION ELEMENT
SENSOR AIR AMBIENT
PORT BACK STOVE
SCREW
SMOKE
EXPULSION
MOTOR
backup battery
2A FUSE
VENTILATION
AMBIENT
2A FUSE
FUSE
two fuses are inserted in the socket with switch,
located on the back of the stove, one of which
operational and the other is held in reserve.
*
*
*
