Bedienungsanleitung Edilkamin Vip (Seite 18 von 62) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

810744

Zoom out

Zoom in

Vorherige Seite

1/62

Nächste Seite

- 18 -

ENGLISH

INSTALLATION

All local and national laws and European standards must be

met when installing and using the appliance. In Italy, refer to

the UNI 10683/2012 standard, as well as any regional or local

health authority regulations

It is necessary to refer to regulations in force in each country. If

installing in an apartment building, check with the management

company ﬁ rst.

VERIFY COMPATIBILITY WITH OTHER

DEVICES

The stove MUST NOT be installed in the same space as type B

gas heating equipment (e.g. gas boilers, stoves, and equipment

served by an extraction hood) as the stove may cause a vacuum

in the space which may compromise or inﬂ uence how these

units work.

FIRE PREVENTION SAFETY DISTANCES

The stove must be installed in compliance with the following

safety conditions:

- ﬂ ammability items must be kept at a minimum distance of 20

cm from the sides and back of the stove

- ﬂ ammable items must be kept at a minimum distance of 80

cm if placed in front of the stove.

If it is not possible to comply with the above mentioned

distances, technical and construction-related provisions

must be taken to prevent ﬁ re hazards. If connected to wooden

walls or other ﬂ ammable materials, the smoke exhaust pipe

must be appropriately insulated

AIR INTAKE

The room of installation must have a suitable outside air intake

with a through surface area of at least 200 cm2 (Ø 16), in order

to replenish the burnt oxygen and ensure an adequate combu-

stion air ﬂ ow.

FIRE DAMPERS

The ﬁ re damper should be easily handled and its position must

be distinguished from the outside through the adjustment knob.

The ﬁ re damper must remain ﬁ xed in its position and must not

be able to close automatically.

The ﬁ re dumper must NOT close the ﬂ ue section completely,

but it must guarantee a permanent minimum opening which

should be equal to 3 % of the section itself and in any case

equal to at least 20 cm2.

CONVEYING ADJUSTMENT

“Two pipe unions are located on the back of the stoves for hot

air channelling.

Each pipe union can be used to send hot air to an adjacent room

using one KIT 8 per outlet, or both can be used to send air to the

same adjacent room using one KIT 9 (use of a single air grate

for the emission of air into the room).”

“To manage the supply of heating air using the two rear pipe

unions (see Page 14) use:

- Lever control B for the RH union

- Lever control A for the LH union.”

N.B. A and B lever controls must only be operated using the

thermal glove supplied as they can heat up considerably.

Various alternatives exist for the distribution of heating air.

100% conveyed

front grille

Left closed – Right closed

50% conveyed LEFT

50% right

front panel

Left closed - Right open

50% conveyed RIGHT

50%

Left front panel

Left open - Right closed

0% conveyed

100%

front grille

Left open – Right open

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Vip Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info