Bedienungsanleitung Edilkamin Windo 2 - 75 (Seite 14 von 24) (Englisch)

810734

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

ENGLISH

INSTALLATION

Natural convection circulation Natural convection circulation

The hot air produced by the fireplace is released into The hot air produced by the fireplace is released into

the rooms to be heated by the nozzles connected to the rooms to be heated by the nozzles connected to

the holes on the cover of the hood with aluminium the holes on the cover of the hood with aluminium

pipes Ø 14 cm.It is essential to guarantee the return of pipes Ø 14 cm.It is essential to guarantee the return of

the air into the room where the fireplace is installed by the air into the room where the fireplace is installed by

means of grills at the base of the walls or gaps under means of grills at the base of the walls or gaps under

the doors.The diameter of the pipes must not be less the doors.The diameter of the pipes must not be less

than Ø 14 cm.than Ø 14 cm.

The line of the pipes must be as straight as possible. The line of the pipes must be as straight as possible.

The aluminium pipes can be hidden with coffer work or The aluminium pipes can be hidden with coffer work or

false beams or they can be built into the walls; in any false beams or they can be built into the walls; in any

case, they must be well insulated.case, they must be well insulated.

The channels must have a maximum length of 4÷5 m The channels must have a maximum length of 4÷5 m

each.each.

The said length must be decreased by 1.2 m for The said length must be decreased by 1.2 m for

every curve and for every nozzle consequent to the

consequent load loss.

The following kits are available to channel hot air.

Kit one/bis solo locale caminetto

Kit four/bis

Kit five/bis

Further details are provided in the assembly instructions

supplied with the kit itself.

Circulation with Kit Air DiffuserCirculation with Kit Air Diffuser

The Air Diffuser Kit carries hot air into the room where

the product is installed or into other rooms (depending

on the model), assisted by one or more fans.

It is adjusted with a remote control.

Edilkamin proposes two Air Diffuser Kit models:

ADJACENT Air Diffuser Kit

REMOTE Air Diffuser Kit

The difference is in the presence or 1 or 2 fans and the

relative aluminium pipes.

The kit can be combined with each of the following

Edilkamin vents:

Split, with lighting

Bent, with lighting

Origami

Sharp

The openings on the fireplace casing are initially The openings on the fireplace casing are initially

closed and must be opened by removing the pre-cut closed and must be opened by removing the pre-cut

membranes to enable the ambient air to pass through membranes to enable the ambient air to pass through

them.them.

The vents are not included in the Air Kit Diffuser and

you can choose the one of the models available and

described which best suits your needs at the retailer.

Kit Air Diffuser Remote- exKit 4 bis-ex

R2 unions

Vent

Alluminium

pipe

Vent

Fan

Control

unit

Aluminium pipe,

dia. 60 mm

Vent

Compensation vent

Aluminium pipe,

dia. 100 mm

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edilkamin Windo 2 - 75 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Edilkamin Windo 2 - 75

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info