Bedienungsanleitung Edimax BR-6104K (Seite 17 von 48) (Holländisch)

516197

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Parameter Description

Obtain an IP address

The ISP requires you to obtain an IP address by DHCP automatically efore connecting to

the PPTP server.

Use the following IP

address

The ISP gives you a static IP to be used to connect to the PTP server.

IP Address This is the IP address that your ISP has given you to establish a PPTP connection.

Subnet Mask

Enter the Subnet Mask provided by your ISP

(e.g. 255.255.255.0)

Gateway Enter the IP address of the ISP Gateway

User ID

Enter the User Name provided by your ISP for the PPTP connection. Sometimes called a

Connection ID

Password Enter the Password provided by your ISP for the PPTP connection

PPTP Gateway

If your LAN has a PPTP gateway, then enter that PPTP gateway IP address here. If you do

not have a PPTP gateway then enter the ISP’s Gateway IP address above

Connection ID This is the ID given by ISP. This is optional.

BEZEQ-ISRAEL Select this item if you are using the service provided by BEZEQ in Israel.

Connection Type

If you select “Continuous”, the router will always connect to the ISP. If the WAN line breaks

down and links again, the router will auto-reconnect to the ISP.

If you select “Connect On Demand”, the router will auto-connect to the ISP when someone

want to use the Internet and keep connected until the WAN idle timeout. The router will

close the WAN connection if the time period that no one is using the Internet exceeds the

“Idle Time”.

If you select “Manual”, the router will connect to ISP only when you click “Connect” manually

from the Web user interface. The WAN connection will not disconnected due to the idle

timeout. If the WAN line breaks down and latter links again, the router will not auto-connect

to the ISP.

Idle Time

You can specify an idle time threshold (minutes) for the WAN port. This means if no packets

have been sent (no one using the Internet) throughout this specified period, then the router

will automatically disconnect the connection with your ISP.

Note: This “idle timeout” function may not work due to abnormal activities of some network

application software, computer virus or hacker attacks from the Internet. For example, some

software sends network packets to the Internet in the background, even when you are not

using the Internet. So please turn off your computer when you are not using it. This function

also may not work with some ISP. So please make sure this function can work properly

when you use this function in the first time, especially your ISP charge you by time used.

Click <OK> when you have finished the configuration above. Congratulations! You have completed the configuration for

the PPTP connection. You can start using the router now, if you wish to use some of the advance features supported by this

router see chapter 2, 3, 4.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edimax BR-6104K Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info