Bedienungsanleitung Edimax EW-7209APg (Seite 14 von 31) (Englisch)

516135

Zoom out

Zoom in

Vorherige Seite

1/31

Nächste Seite

Parameter Description

ESSID

The ESSID (up to 31 printable ASCII characters) is the unique name in a

WLAN. The ID prevents the unintentional merge of two nearby WLANs.

Please make sure that the ESSID of all wireless stations in the same

WLAN network are the same. The default ESSID is “default”. You should

assign ESSID in “AP mode”, “Station-Ad Hoc mode”, “Station-

Infrastructure mode”, “AP Bridge-WDS mode” and “Universal Repeater

mode”.

Band

It allows you to set the AP fixed at 802.11b or 802.11g mode. You also

can select B+G mode to allow the AP select 802.11b and 802.11g

connection automatically.

Channel Number

Select the appropriate channel from the list provided to correspond to your

network settings. Channels differ from country to country.

Channel 1-11 (North America)

Channel 1-14 (Japan)

Channel 1-13 (Europe)

There are 14 channels available.

You should assign Channel Number in “AP mode”, “Station-Ad Hoc

mode”, “AP Bridge-Point to Point mode”, “AP Bridge-Point to Multi-Point

mode” and “AP Bridge-WDS mode”, “Universal Repeater mode”.

MAC Address

If you want to bridge more than one wired Ethernet networks together with

wireless LAN, you have to set this access point to “AP Bridge-Point to

Point mode”, “AP Bridge-Point to Multi-Point mode” or “AP Bridge-WDS

mode”. You have to enter the MAC addresses of other access points that

join the bridging work.

WLAN MAC

In “Station-Ad Hoc mode”, “Station-Infrastructure mode” and “Universal

Repeater mode”, this device need a WLAN MAC address to act as a

station to connect to other peer or access point. You also can click “Clone

MAC” button to let this device copy the MAC address of the PC you are

using to configure this device.

Root AP SSID

In “Universal Repeater mode”, this device can act as a station to connect

to a Root AP. You should assign the SSID of the Root AP here.

Set Security

In “AP Bridge-Point to Point mode”, ““AP Bridge-Point to Multi-Point mode”

and “AP Bridge-WDS mode”, you can click “Set Security” to add

encryption for the communication between the bridged access points. This

can protect your wireless network.

Associated Clients

Click “Show Active Clients” button, then an “Active Wireless Client Table”

will pop up. You can see the status of all active wireless stations that are

connecting to the access point.

Wireless Site Survey

When you use this access point as a wireless station for wired network

device to have wireless capability, you have to associate it will an working

access point. Click “Select Site Survey” button, then a “Wireless Site

Survey Table” will pop up. It will list all available access points near by.

You can select one access point in the table and it will join wireless LAN

through this access point.

Click Apply button at the bottom of the screen to save the above configurations. You can now configure

other advance sections or start using the Access Point.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Edimax EW-7209APg Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info