(7) have been put together correctly and that no part is missing. Please see the pictures
on page 4.
(*) Competent qualified electrician: after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this electrician.
IMPORTANT INFORMATION
This appliance is not suitable for a prolonged use. This food slicer is suitable for a use of
maximum 5 minutes. Never exceed this period of time. Failure to follow this instruction carefully
may result in damage to the motor. Please insert breaks of at least 10 minutes.
USING THE SLICER
• Clean all exterior parts of the appliance before the first use.
• Make sure the appliance is on a steady surface and open the table (1).
• Put the mounted platform on top of the table. The platform should be secured in the table
groove. Now add the pusher (7).
• Select the slicing thickness by turning the adjusting knob (9). You can check the millimetres
on a scale on the appliance (5).
• Plug in the appliance. The slicer is now ready for use.
• Lay the food to be sliced between the blade and the pusher.
• First press the safety switch (4), then the on/off switch (10). The blade will start rotating.
Now you can release the safety switch. The appliance will operate as long as you keep
the on/off switch pressed.
• Push the platform with the other hand to bring the food to the blade. As a safety measure,
the platform cannot be moved easily. This means that the pressure has to be sufficiently
strong in order to obtain regular slices.
• To avoid food sticking to the appliance, you can moisten the blade with a wet towel
beforehand. This also allows you to slice more easily.
• Always use the pusher when slicing small parts and leftovers.
• Do not slice meat with bones, food with large seeds, rolled roast without removing the
string, wrappers (i.e. aluminium foil), frozen food or any hard, inedible food parts.
CLEANING
• Before cleaning, always unplug the appliance.
• Wipe the inside and outside of the appliance with a paper towel or a soft and damp
cloth. It should not be washed in a dishwasher.
• Do not clean the appliance with any abrasive scouring pad or steel wool as this will
damage the finish.
• Do not immerse in water or any other liquid.
• The blade can be taken off by turning the blade-locking knob (2) about 90° anticlockwise
and taking it off carefully.
• Clean the blade with soapy water and give it a rinse. Caution: the blade is very sharp.
After cleaning, put the blade back and turn the locking knob clockwise to fasten it.
• You can also take off the entire motor block. To do so, first remove the blade, then press
the unlocking knob (12) and take out the motor block sideways and downwards. To put it
back, insert it at the top and press it down at the bottom until it clicks into place.
•
Dry all parts well before storage.
