Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
9
SC KA 600 - 100907
Back cover page (last page)
Assembly page 9/20
Never forget that the coffee coming out of the appliance is very hot. Only move the jug
very carefully to avoid splashing.
(*)
Competent qualified electrician: after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this electrician.
INITIAL OPERATION
• When you use your appliance for the first time, pour fresh water into the water tank and
switch on the appliance (without coffee).
• Once all the water has passed through, switch the appliance off and let it cool down.
When it is cold enough, repeat the process with fresh water. Repeat this process 3 times.
PREPARATION OF COFFEE
• Open the lid of the water tank and the filter holder.
• Pour the desired amount of water into the water tank. Both the glass jug and the scale on
the water tank show the amount for normal cups (1 cup = 125 ml) and small cups. Make
sure not to overfill by filling maximum 12 (15) cups of water.
• Open the lid of the filter holder.
• Insert a paper filter (size 4) in the filter holder and add the desired quantity of ground
coffee (approximately 6g per cup, or a teaspoonful).
Pay attention
: fold the bottom and
the side edges of the paper filter in such a way that it fits perfectly in the filter holder.
• Never forget to close the lid before switching on your coffee maker.
• Put the jug with closed lid on the hotplate.
• Switch on the coffee maker by putting the switch in position “1”. The pilot light will be
illuminated, indicating that your appliance is in use. Thanks to the keep warm function,
your coffee is warmed up as long as the appliance is switched on and the jug is situated
on the hotplate.
• When the brewing process is over, remove the jug from the hotplate (the drip stop will
prevent dripping); pour the desired amount of coffee and put the jug with the remaining
coffee back on the hotplate.
• However, we advise you to not let the appliance switched on for more than 2 hours and
make sure that you never let an empty jug on the hotplate. The hotplate will only stop
heating up when the switch is in the OFF position (i.e. position “0”).
DESCALING AND CLEANING
• We advise you to descale the
coffee maker to prolong its life
span. For descaling, only use
products especially made to
descale coffee makers and follow
their instruction manual. Then rinse
the appliance twice with fresh
water, without coffee powder.
Guarantee claims will not be
accepted for appliances that
have not been descaled.
• Never use a dishwasher to clean
the jug. Just clean it in soapsuds.
The lid is detachable; raise the lid
out of its hinge
