Bedienungsanleitung Eiki LC-X85 (Seite 4 von 120) (Englisch)

543729

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

- 4 -

Openings in the cabinet are provided for ventilation.

To ensure reliable operation of the product and to

protect it from overheating, these openings must not

be blocked or covered.

Air Circulation

CAUTION IN CARRYING OR

TRANSPORTING THE PROJECTOR

– Do not drop or bump the projector, otherwise

damages or malfunctions may result.

– When carrying the projector, use a suitable carrying

case.

– Do not transport the projector by courier or any

other transport service in an unsuitable transport

case. This may cause damage to the projector. For

information about transporting the projector by

courier or any other transport service, consult your

dealer.

– Do not put the projector in a case before it is cooled

enough.

Cautions in Handling the Projector

Moving the Projector

Remote Control Battery Installation

Hot air is exhausted from the exhaust vent. When

using or installing the projector, the following

precautions should be taken.

– Do not put any flammable object or spray can near

the projector, hot air is exhausted from the air

vents.

– Keep the exhaust vent at least 3’ (1 m) away from

any objects.

– Do not touch peripheral parts of the exhaust vent,

especially screws and metallic parts. These areas

will become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on

the cabinet will not only get damaged but also may

cause fire hazard by heat.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

CAUTUON

Do not hold the lens and the peripheral part.

Exhaust Vent

(Hot air exhaust)

Air Intake Vent

Air flow

Use the handle grip when moving the projector.

Retract the adjustable feet to prevent damage to the lens

and cabinet when carrying.

When this projector is not in use for an extended period, put

it into a suitable case to protect the projector.

Do not hold the lens or the top cover when lifting or moving

the projector. Doing so may cause damage to the lens and

the projector.

Care must be taken when handling the projector; do not

drop, bump, subject it to strong forces, or put other things

on the cabinet.

12 3

Open the battery

compartment lid.

Install new batteries into

the compartment.

Replace the

compartment lid.

Press the lid downward and

slide it.

Two AAA size batteries

For correct polarity (+ and –),

be sure battery terminals are

in contact with pins in the

compartment.

To ensure safe operation, please observe the following precautions :

● Use two (2) AAA or LR03 type alkaline batteries.

● Always replace batteries in sets.

● Do not use a new battery with a used battery.

● Avoid contact with water or liquid.

● Do not expose the remote control to moisture or heat.

● Do not drop the remote control.

● If the battery has leaked on the remote control, carefully wipe the case clean and install new batteries.

● Risk of an explosion if battery is replaced by an incorrect type.

● Dispose of used batteries according to the instructions.

KR7BL-A_quick.indb 4KR7BL-A_quick.indb 4 09.8.27 2:34:22 PM09.8.27 2:34:22 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eiki LC-X85 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eiki LC-X85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info