Bedienungsanleitung Einhell BT-PO 90 (Seite 16 von 88) (Englisch, Dänisch, Schwedisch, Norwegisch)

606059

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

- 16 -

6. Operation

6.1 Mounting the polishing bonnet on the po-

lishing disk (Fig. 2)

1. Turn the car polishing machine upside down

so that the polishing disk is facing up.

2. Pull the textile polishing bonnet over the poli-

shing disk (Fig. 2). Make sure that the textile

polishing bonnet is free of any foreign bodies.

6.2 Applying wax/polishing paste to the texti-

le polishing bonnet (Fig. 3)

Note: Use only high-quality waxing and polishing

products and follow the processing instructions

issued by the manufacturer on the packaging.

Distribute the polishing agent evenly as far as the

edge of the textile polishing bonnet so that a uni-

form, thin coating is produced overall.

Note: Applying too much polishing agent will only

make it more diﬃ cult to remove the layer of poli-

shing agent later from the paintwork and will not

improve the results.

6.3 Switching on and applying the polishing

agent to the paintwork

Note: The paintwork you want to process must be

carefully cleaned and completely dry. Severely

oxidized paintwork requires the use of a special

cleaner.

Select a cleaner from the products available to

suit the state of the paintwork and the stress it is

exposed to.

1. Dab with the textile polishing bonnet on dif-

ferent positions of the paintwork you want to

polish. This will help to distribute any excess

polishing agent over the textile polishing

bonnet and/or over the paintwork you want to

polish.

2. Hold the handle of the equipment ﬁ rmly in

both hands, place the polishing machine onto

the paintwork you want to polish (Fig. 4) and

switch on the equipment by pressing the On/

Oﬀ switch (Fig. 1 / Item 3).

3. First work on the large level surfaces such

as the engine hood, boot lid and roof (Fig.

5), then on the smaller surfaces such as the

doors and mudguards (Fig. 6). Guide the

equipment smoothly over the paintwork, exer-

ting no pressure.

4. Switch oﬀ the equipment with the On/Oﬀ

switch (Fig. 1 / Item 3) before you remove it

from the paintwork you are polishing.

5. For areas which are diﬃ cult to reach, remove

the textile polishing bonnet from the polishing

disk and process these areas by hand (Fig.

7).

6.4 Polishing the paintwork with the synthetic

polishing bonnet

Note: After the previously applied polishing agent

has dried completely on the paintwork, you can

begin with the polishing. Damp polish will be sme-

ared by the synthetic polishing bonnet.

1. Replace the textile polishing bonnet with the

synthetic polishing bonnet. Make sure that

the synthetic polishing bonnet is free of any

foreign bodies.

2. Remove the polish layer in the same order in

which you applied the polishing agent to the

paintwork. Be sure to follow the instructions

issued for using the waxing and polishing

agent.

7. Replacing the power cable

If the power cable for this equipment is damaged,

it must be replaced by the manufacturer or its

after-sales service or similarly trained personnel

to avoid danger.

8. Cleaning, maintenance and

ordering of spare parts

Always pull out the mains power plug before star-

ting any cleaning work.

8.1 Cleaning

•

Keep all safety devices, air vents and the

motor housing free of dirt and dust as far as

possible. Wipe the equipment with a clean

cloth or blow it with compressed air at low

pressure.

•

We recommend that you clean the device

immediately each time you have finished

using it.

•

Clean the equipment regularly with a moist

cloth and some soft soap. Do not use

cleaning agents or solvents; these could at-

tack the plastic parts of the equipment. Ensu-

re that no water can seep into the device. The

ingress of water into an electric tool increases

the risk of an electric shock.

•

Wash the polishing bonnets only by hand and

let them air-dry.

•

When the polishing machine is not being

Anl_BT_PO_90_SPK1.indb 16Anl_BT_PO_90_SPK1.indb 16 01.10.13 14:4201.10.13 14:42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Einhell BT-PO 90 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Einhell BT-PO 90

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info